I am looking to use Dzus fasteners to mount my bumper, my main reason behind this is the ease of removal/install (I have to remove my bumper to load car on dolly) i know im going to have to weld a bracket to hold up the Dzus plates, im just curious to see how u guys are mounting the hardware. any pics or info will be appreciated!

 

also looking for this info...

 

I would like to use them for my lexan door windows, if thats even possible.

 

Check these out.......

www.quik-latch.com/

No tool needed, more heavy duty, last longer, and look nicer.

 

In for pics!!

 

for the 300 they want for the quick latch you can do the whole car in dzus fasteners...

 

^and for the price of a gt42r you can buy 5 ebay turbos
the quick latches are a very nice piece

 

I've had moroso dzus fasteners in my tool box for 8-9 years lol. I'm dieing to use them!

 

hey buddy the ones u need are the mini quck latch which are $30 not $300 those are for the hood check the videos out on the website

http://www.quik-latch.com/quik-latch-mini-latch.html

 

i actually like these better than dzus fastner no tools needed to take off or put on after installation

 

matt i was suppose to do this to my car aswell due to the same reason...too bad i ended up selling the jojo front.but i did manage to look into how they should be installed and i know were to get the parts needed and i got the welder at the garage

 

nice find. might do 2 on the front bumper and get rid of those screws.

 

just looked at those...looks good

 

i need them for my bumper...and i wasnt gonna spend 300 per latch...30 dollars is better cause all i need is to weld a bracket on fender and drill a hole on the bumper...but the dzuz are still lower profile........either way is good...

 

Look on my homepage www.skippworks.com

I have 4 holding my bumper on....the driver side got ****ed up cuz my slick pulled the bumper on a pass at the track.

I did a red EK recently too....

I can sell you the fasteners, the brackets, and springs. PM for details
All you need to do is drill, and rivet, and your done.

 

No welding required...you can drill two holes in the fender and use bolt+nuts.

For the front two, I just bent the bracket to about a 45 degree angle, and riveted it to the radiator support....

Bumper sits in oem location, and does not sag at all.

 

thats exactly what im looking for, u got PM!!

 

Best part: NO welding required!

 

dont you think this kit your selling is only good for the guys using oem fenders? have you tried putting this on a fiberglass front such as a jojo or exospeed? im pretty sure it will not hold unless the brakets are welded to the body and not "bolted" to the fender

 

lmao. great reply

 

A couple guys with exospeed front ends picked em up.

I put it together with the intent of using oem bumpers, etc. I am sure brackets wouldnt be hard to make, and these would hold the fiberglass in place really well.

 

Cant get cheaper then this
http://www.swracecars.com/store/Quar...-OSCAR_79.aspx

 

If you use the same location as the above pictures then it doesn't matter what front end you're using. I'll take pics tonight of how I did it.

It's super easy and cheap. No need to buy a "kit".

 

I PM'ed him with the same question..i think im gonna weld a bracket to be on the safe side..

^waiting on pics!!

 

yea ...that link of s&w that was posted will be put to use in a few mins lol