Im a big fan of some serious carnage pictures. I see we dont have a thread here for that and thought it would be fun to see your drag racing carnage pics.

Here is a couple of a semi built SR20DET that i did about 2 1/2 years ago. CP pistons on stock rods, cosworth headgasket, cams, and so on.

Hydraulic lifter failed and collapsed sending the rocker flying, hit the s&r just right dropping an exhaust valve shattering the piston. The rod and wrist pin actually dug into and punched through the cylinder wall and cracked the front of the block and popped the freeze plug out as seen.

Amazingly enough, the stock rod was still attached to the crank with nothing on the big end of the rod messed up. Rod was mangled but still in one piece. That was what was pulled out of the motor both with the pan and what i threw in with it after removing the rod off the crank.









Enjoy. Now miller post up some of the carnage you mentioned in the other thread. haha

 

dont have any pictures of the remains of the rod and piston.. but the rod let loose at the wristpin and just went to spinnin lol

 

Holy Skil Saw !!

 

 

Wow, thats a clean cut through that block. My rod didnt make it out of the sleeve which is why it just punched right through it, haha.

 

i think me and jake got this covered! lol

 

here is some of mine.

 

Thats my girdle son, thats the **** right there. You have any pics of the main caps?

 

haha I noticed the cracked main caps on my way to the shop.

You suck man! lol

Next pictures will be the self clearance aluminum rods in the "Outlaw" motor.
which is still good btw.

 

Self clearancing is the ****!!

 

So your B series main girdles only cover the 2, 3, and 4 main caps? Ive never opened one up so curious. I know that not all the B series came with girdles correct. I think the what the b18c5 was the one that came with them correct?

Here is a pic of the SR20 bottom end/girdle



It would take some brute strength to split the bottom end of one of these. lol

 

Holy mountain motor miller! lol

 

And this, is why I now resort to riding bicycles haha

 

 

^^^ding ding ding winner

 

lolwut

 

holy bajeezus. yeah thats a winner right there. haha.

 

damn

 

/\ /\ /\ details please! wtf happened?!

 

DAMMMMNNNN!!!!

WTF!!!

 

Theres a B series motor in Chuck Seitsingers case at his shop where a rod swung all the way around and literaly chopped the block in half. ill have to see if i can find the pic.

 

wtf happened?lol

 

LOL now that is a winner

 

there is a pic somewhere of an eagle crank breaking, and chopping the block in half like the one above.

here is my on going 4th gear carnage: