good morning.
ive got a da6 integra 89 shape.
running a set of dss old stage 5 and a half shaft.
im not sure if the half shaft is a dss shalf shaft or not, any one able to tell me how to check,
also
the half shaft seal in the gear box is to big, i have a 2mm gap around the half shaft, it pored oil out when i was fulling it up,
i checked the old seal against the old half shaft with my stock axles and its fits nicly.
when its on the new half shaft the seal is to big.
ive put in a full seal kit, the seal fits the old intermediate shaft but not the new one
has this happened befor or do i have a half shaft thats been on a lath.

 

You need to buy the axle seal on that side for a 94 and up integra.

 

x2

Honda & Acura Part Number: 91205-PL3-A01

haha, I did the footwork for you and realized the part numbers for the seal are the same at acura and honda. haha...

hope that helps.