WI 2000 S2000 race car project. Trades welcome
Thread Starter
Honda-Tech Member
Joined: Dec 2000
Posts: 2,013
Likes: 0
From: Mt. Horeb, WI, United States
The car was in a accident at Mid Ohio and has body damage down the right side of the car. No frame damage call cosmetic . I purchased the car to turn it into a full race car.
Pictures are here
http://gallery.me.com/shawnpmcloughlin/100290
I have new panels to replace the damage but the rear quarter panel will need to be pulled out.
I have removed the interior, and top for the race car conversion (carpet, seats, oem steering wheel have been sold) the rest of the interior panels come with the car. I also have put a Momo steering wheel in the car with a NRG quick release.
I do not have time with family and house projects to complete the car.
I am asking $6000.00 obo. I am located in Madison WI.
Shawn McLoughlin
shawn@redheadracing.net
'00 Honda S2000
Silverstone Metallic
29k miles on the engine, 105k miles on the chassis.
Detailed maintenance records since day one.
Very nice, safe, custom 4pt roll bar installed by TAD Motorsports, Lake Zurich, IL
Can be run at autocross, HPDE, and Time Trials.
Engine & Drivetrain
Stock 27k mile engine professional installed 5/06
Computech Carbon Fiber cold air intake w an extra filter
Stock Intake with K&N air filter and stock paper filter
AC recharged 5/06
New Clutch installed by King Motorsport
Borla Stainless Steel Cat Back exhaust system
Stock exhaust system
New battery
Fresh Redline MTL in the 6 spd manual (4/06)
Redline Synthetic gear lube in the rear end
Wheel and Suspension/Brakes
OE 16" 5 spokes, refinished black by A&L Autobody
OE 16" 5 spokes with nice factory finish
ARP high strength wheel studs
New brake calipers & rotors 8/06
Stainless Steel Brake lines 6/05
New Carbotech XP10 & XP8 brake pads 9/06
Many spare brake pads (Carbotech, Hawk, Cobalt, stock), and rotors
Mugen Hard Rubber suspension bushings
Espleir spring with 10k shocks
Small Fortune (Gendron) Front Sway Bar ($600 8/06)
Suspension has can be adjusted to suit any driving style.
Body and Inside
Custom Roll bar by TAD Motorsport
Special features & history
Car appears and drives much more than the sum of parts. Drives comfortably to work and on the street. Roll bar cosmetically could be mistaken for stock, yet is very safe, and structurally strong. Originally owner (name & # can be provided to buyer) commuted daily in the car almost 20k miles per year and ran the car in 1 Lap of America a couple times. I autocrossed, instructed at HPDE's, and did time trials in the S2000. Very quick on the track , fights for FTD at local autox's.Extensive spares package, detailed service records, all factory literature, and factory shop manual included.
Plus the above mentioned old motor and parts.
__________________
Pictures are here
http://gallery.me.com/shawnpmcloughlin/100290
I have new panels to replace the damage but the rear quarter panel will need to be pulled out.
I have removed the interior, and top for the race car conversion (carpet, seats, oem steering wheel have been sold) the rest of the interior panels come with the car. I also have put a Momo steering wheel in the car with a NRG quick release.
I do not have time with family and house projects to complete the car.
I am asking $6000.00 obo. I am located in Madison WI.
Shawn McLoughlin
shawn@redheadracing.net
'00 Honda S2000
Silverstone Metallic
29k miles on the engine, 105k miles on the chassis.
Detailed maintenance records since day one.
Very nice, safe, custom 4pt roll bar installed by TAD Motorsports, Lake Zurich, IL
Can be run at autocross, HPDE, and Time Trials.
Engine & Drivetrain
Stock 27k mile engine professional installed 5/06
Computech Carbon Fiber cold air intake w an extra filter
Stock Intake with K&N air filter and stock paper filter
AC recharged 5/06
New Clutch installed by King Motorsport
Borla Stainless Steel Cat Back exhaust system
Stock exhaust system
New battery
Fresh Redline MTL in the 6 spd manual (4/06)
Redline Synthetic gear lube in the rear end
Wheel and Suspension/Brakes
OE 16" 5 spokes, refinished black by A&L Autobody
OE 16" 5 spokes with nice factory finish
ARP high strength wheel studs
New brake calipers & rotors 8/06
Stainless Steel Brake lines 6/05
New Carbotech XP10 & XP8 brake pads 9/06
Many spare brake pads (Carbotech, Hawk, Cobalt, stock), and rotors
Mugen Hard Rubber suspension bushings
Espleir spring with 10k shocks
Small Fortune (Gendron) Front Sway Bar ($600 8/06)
Suspension has can be adjusted to suit any driving style.
Body and Inside
Custom Roll bar by TAD Motorsport
Special features & history
Car appears and drives much more than the sum of parts. Drives comfortably to work and on the street. Roll bar cosmetically could be mistaken for stock, yet is very safe, and structurally strong. Originally owner (name & # can be provided to buyer) commuted daily in the car almost 20k miles per year and ran the car in 1 Lap of America a couple times. I autocrossed, instructed at HPDE's, and did time trials in the S2000. Very quick on the track , fights for FTD at local autox's.Extensive spares package, detailed service records, all factory literature, and factory shop manual included.
Plus the above mentioned old motor and parts.
__________________
Last edited by RedheadRacing; Mar 12, 2011 at 09:07 AM.
Picked up my s2k with 115K miles on the clock for 8k in good shape for the miles....
I could see this thing maybe going for 5k...
Looks like a fun track car tho
I could see this thing maybe going for 5k...
Looks like a fun track car tho
Honda-Tech Member
iTrader: (4)
Joined: Dec 2004
Posts: 4,344
Likes: 1
From: Bellevue/NE, Dallas/TX, USA
Thread Starter
Honda-Tech Member
Joined: Dec 2000
Posts: 2,013
Likes: 0
From: Mt. Horeb, WI, United States
I am considering offers if you think the price is to high. There is a lot of aftermarket parts on there and everything except the rear quarter is bolt on parts that come with the car. Not much work to get it back on the track or the road. It has a clean title also.
At this time I am not looking to part anything out though.
Shawn
At this time I am not looking to part anything out though.
Shawn
Trending Topics
damn if it had the seats i would throw up the del sol for trade but i don't want to be looking all over for the seats, do you have a door for it? and the oem gauge cluster and what not?
Thread Starter
Honda-Tech Member
Joined: Dec 2000
Posts: 2,013
Likes: 0
From: Mt. Horeb, WI, United States
I have everything to put it back together except the seats, carpet and steering wheel.
It even comes with extra fenders and headlights and tail lights.
It even comes with extra fenders and headlights and tail lights.
yeah but like i said i don't want to be trying to find seats for it, the paint and bodywork ain't a problem, do you still have the top for it? would it still work if installed w/ the roll bar and what not?
any chance the headlights you have on the floor are extra, good luck with the sale. pm me if you got a set of headlights for sale i have cash ready.
Ive got a MR2 turbo PM me for details and any interest
Id only get rid of this car for a nsx,s2000, or a m3...u..Or any other "true" drivers car
But the spare replacement parts would need to be bolted onto your car in working order.
The seats arent a issue, but it needs to be in real driving shape
Is heat and ac still hooked up?
Id only get rid of this car for a nsx,s2000, or a m3...u..Or any other "true" drivers car
But the spare replacement parts would need to be bolted onto your car in working order.
The seats arent a issue, but it needs to be in real driving shape
Is heat and ac still hooked up?


