FS: z6 head, fully built
Thread Starter
Honda-Tech Member
Joined: Jul 2010
Posts: 118
Likes: 1
FS: z6 head, fully built
I have a D16z6
With the following..
Its fully built with Skunk2 springs/retainers/valves(need to be cleaned, we recommend keith(dibble), you can go through us to have this work done)
Stock z6 manifold
Vtec noid
Injectors and fuel rail.
It will not have a cam, Dizzy or valvecover.
Asking 200.00 , if it needs to be shipped add 50.00.
It has been cleaned by me, and is in good condition, stock height head, it has not been milled.
225-505-7729
I run a shop with ALL M0T0R on this forum, who's very well known and has tons of vouches. This is a head that has come off of a customers car that we are redoing and he's not using.
With the following..
Its fully built with Skunk2 springs/retainers/valves(need to be cleaned, we recommend keith(dibble), you can go through us to have this work done)
Stock z6 manifold
Vtec noid
Injectors and fuel rail.
It will not have a cam, Dizzy or valvecover.
Asking 200.00 , if it needs to be shipped add 50.00.
It has been cleaned by me, and is in good condition, stock height head, it has not been milled.
225-505-7729
I run a shop with ALL M0T0R on this forum, who's very well known and has tons of vouches. This is a head that has come off of a customers car that we are redoing and he's not using.
Honda-Tech Member
Joined: May 2003
Posts: 2,623
Likes: 0
From: VA>WA>OR>OK
Re: FS: z6 head, fully built
i find it funny that a "fully built" head is a stock head with valves springs and ret.
are the valves larger than OEM?
has there been any port work or chamber work done to the head?
sounds to me like you have an OEM head with skunk2 valvetrain....
/.02
are the valves larger than OEM?
has there been any port work or chamber work done to the head?
sounds to me like you have an OEM head with skunk2 valvetrain....
/.02
Thread
Thread Starter
Forum
Replies
Last Post
