Acura Integra Type-R All Integra Type R Discussions

does anyone know the piping diameter for the buddy club spec 2

Thread Tools
 
Search this Thread
 
Old Sep 21, 2002 | 08:10 PM
  #1  
lazyguy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 955
Likes: 0
From: the couch, USA
Default does anyone know the piping diameter for the buddy club spec 2

thinking about getting it

thanks in advance
Reply
Old Sep 21, 2002 | 08:17 PM
  #2  
BlueR's Avatar
Honda-Tech Member
iTrader: (10)
 
Joined: Aug 2001
Posts: 11,061
Likes: 0
From: bumper to bumper with AMERIE
Default Re: does anyone know the piping diameter for the buddy club spec 2 (b18cURmama)

that shiet is loud beyond imagination...i sat in R&D Daniel's EG and i was still deaf after two hours...think it over...plenty of other great exhaust on the market that won't require new eardrums


[Modified by BlueR, 12:18 AM 9/22/2002]
Reply
Old Sep 22, 2002 | 03:11 PM
  #3  
lazyguy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 955
Likes: 0
From: the couch, USA
Default Re: does anyone know the piping diameter for the buddy club spec 2 (BlueR)

is the buddy club a true 2.5 diameter exhaust can anyone help?
Reply
Old Sep 22, 2002 | 03:21 PM
  #4  
SurferX's Avatar
 
Joined: Apr 2002
Posts: 1,248
Likes: 0
From: O.C., CA, USA
Default Re: does anyone know the piping diameter for the buddy club spec 2 (b18cURmama)

No it's a regular 60 or 60.5mm OD exhaust (2 3/8") like most all other Japanese brand mass market exhausts.
Reply
Old Sep 22, 2002 | 03:28 PM
  #5  
ARunto's Avatar
Honda-Tech Member
 
Joined: Apr 2000
Posts: 1,330
Likes: 0
From: Indianapolis, IN
Default Re: does anyone know the piping diameter for the buddy club spec 2 (b18cURmama)

It's 60mm piping...no bottle necks...small resonator and no muffler section. I'm running with toda header & test pipe. It's a very loud exhuast without the silencer. Lower and mid RPM it's nice and bassy but at high RPM it is very loud. The silencer does help and makes it bearable.





-Alan
Reply
Old Sep 22, 2002 | 04:40 PM
  #6  
lazyguy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 955
Likes: 0
From: the couch, USA
Default Re: does anyone know the piping diameter for the buddy club spec 2 (ARunto)

there is no bottle necks in the exhuast cuz i dont really care about how loud it is that doesnt really bother me. just looking for something free flowing i figure its probly better than the zigen or skunk as well

thanks for the response

do u have any pics of ur car from further behind ????


[Modified by b18cURmama, 1:41 AM 9/23/2002]
Reply
Old Sep 22, 2002 | 05:30 PM
  #7  
ARunto's Avatar
Honda-Tech Member
 
Joined: Apr 2000
Posts: 1,330
Likes: 0
From: Indianapolis, IN
Default Re: does anyone know the piping diameter for the buddy club spec 2 (b18cURmama)



-Alan
Reply
Old Sep 22, 2002 | 06:21 PM
  #8  
Hunter's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 3,164
Likes: 0
Default Re: does anyone know the piping diameter for the buddy club spec 2 (ARunto)

anybody got a sound clip?
Reply
Old Sep 22, 2002 | 06:21 PM
  #9  
Casey's Avatar
Honda-Tech Member
20 Year Member
Liked
iTrader: (5)
 
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Default Re: does anyone know the piping diameter for the buddy club spec 2 (ARunto)

looks good, you do have to cut it 3" because of usdm cat right? also is it bearable on the street with silencer?
Reply
Old Sep 22, 2002 | 06:24 PM
  #10  
Hunter's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 3,164
Likes: 0
Default Re: does anyone know the piping diameter for the buddy club spec 2 (CWTypeR463)

also is it bearable on the street with silencer?
let me rephrase casey's question, would you get a ticket for being too loud if u had the silencer in? also, is it so loud w/ the silencer in and out, that a cop could hear you and hunt u down by following the noise?
Reply
Old Sep 22, 2002 | 06:25 PM
  #11  
Casey's Avatar
Honda-Tech Member
20 Year Member
Liked
iTrader: (5)
 
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Default Re: does anyone know the piping diameter for the buddy club spec 2 (Hunter)

just shift at 2.5k u pansy and kick the clutch in if you see the popo
Reply
Old Sep 22, 2002 | 06:33 PM
  #12  
disordeR's Avatar
Member
 
Joined: Jul 2001
Posts: 2,809
Likes: 0
From: CA, usa
Default Re: does anyone know the piping diameter for the buddy club spec 2 (CWTypeR463)

just shift at 2.5k u pansy and kick the clutch in if you see the popo
haha . okay, i thought i could handle my T1R unsilenced for long periods of time, but no. i can't if sound TRUELY does NOT and absolutely WILL NOT bother you, this looks like your exhaust. i'll give you an idea, my car, on thunderhill road course, people will ALWAYS know where it is.

so in conclusion- yes cops will be able to follow the sound. silenced? i have no idea. but my car is friggen loud unsilenced, and i imagen the Spec 2 being twice as loud.
Reply
Old Sep 22, 2002 | 06:43 PM
  #13  
Casey's Avatar
Honda-Tech Member
20 Year Member
Liked
iTrader: (5)
 
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Default Re: does anyone know the piping diameter for the buddy club spec 2 (disordeR)

hey, youre talking to 2 guys who are stunnas and took off the axle back for ***** and giggles muahahaha
Reply
Old Sep 22, 2002 | 07:05 PM
  #14  
Hunter's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 3,164
Likes: 0
Default Re: does anyone know the piping diameter for the buddy club spec 2 (CWTypeR463)

hey, youre talking to 2 guys who are stunnas and took off the axle back for ***** and giggles muahahaha
yea, i've been driving the snatchcrap back and forth from greensboro to raleigh to school w/ no muffler section. basically the same as the spec 2 i'm guessin' w/ just a cat and resonator. however, the spec 2 has a bit more piping, so i'm guessing it'll be a bit quiter. and i think it would be streetable w/ the silencer in. but, i'd still love to hear some sound or video clips if someone can help us out!
Reply
Old Sep 22, 2002 | 07:10 PM
  #15  
Hooch'n's Avatar
Member
 
Joined: May 2001
Posts: 8,201
Likes: 1
From: Notgrapebutgreat, S.C./N.C., USof A
Default Re: does anyone know the piping diameter for the buddy club spec 2 (Hunter)

Do a search.................Honda Challenge ITR #77
Reply
Old Sep 22, 2002 | 07:13 PM
  #16  
Rob :190:'s Avatar
Member
 
Joined: Jul 2001
Posts: 5,980
Likes: 0
From: Charlotte, NC, USA
Default Re: does anyone know the piping diameter for the buddy club spec 2 (Hooch at 8400-RPM)

I heard it on robert's (X4racer or something) race car with the silencer installed, wasnt terribly loud at low rpms.
Reply
Old Sep 22, 2002 | 07:30 PM
  #17  
Todd00's Avatar
I said I don't want a title!
 
Joined: Jan 2000
Posts: 11,506
Likes: 2
From: OH
Default Re: does anyone know the piping diameter for the buddy club spec 2 (ARunto)

Sweet exhaust Alan--wonder where you go that from?

The silencer in kills the upper end power, but then again so does it being out because you never want to run like that on the street if you can help it.

But the thing does run great up top and flows like a champ and it looks great to boot. It beat me up on the freeway though, even with the silencer in.
Reply
Old Sep 22, 2002 | 07:38 PM
  #18  
lazyguy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 955
Likes: 0
From: the couch, USA
Default Re: does anyone know the piping diameter for the buddy club spec 2 (ARunto)

thanks for the pic man, oh yea the car looks good too

im probly gonna get it cops dont really bother us around here for a loud exhaust and if u go by a cop u can always put the clutch down no biggy


Reply
Old Sep 22, 2002 | 07:40 PM
  #19  
Reid's Avatar
Global Moderator
 
Joined: Jan 2000
Posts: 11,470
Likes: 0
From: Yokohama, Japan
Default Re: does anyone know the piping diameter for the buddy club spec 2 (b18cURmama)

im probly gonna get it cops dont really bother us around here for a loud exhaust and if u go by a cop u can always put the clutch down no biggy
Once you're rolling it's easy to make your car quieter.

Try accelerating slowly and quietly from a stop when a cop is within range. That is when I find it most difficult to hide the noise from my lack of an exhaust.
Reply
Old Sep 22, 2002 | 08:11 PM
  #20  
ARunto's Avatar
Honda-Tech Member
 
Joined: Apr 2000
Posts: 1,330
Likes: 0
From: Indianapolis, IN
Default Re: does anyone know the piping diameter for the buddy club spec 2 (Reid)

The exhuast is loud enough to scare people behind and beside you. Even with the silencer in it's pretty loud.

Hunter...I was rolling around with just ITR b-pipe and no muffler for a little bit and that is much quieter when compared to BC Spec II.

Last night some friends of mine took some video clips of my car going thru a tunnel and on the street. I can tell you this my ears were ringing after going thru the tunnel a couple times at WOT

As for fitment I had to get a 11 3/4" test pipe.

I'll do some dyno runs with the silencer in and out. I'll post when I get'em.

The exhuast is very stealth as the tip is small and sits nicely on '94-97 bumpers. It's amazing though how much sound it makes though

Todd00...thanks for selling me the exhuast



-Alan
Reply
Old Sep 22, 2002 | 08:43 PM
  #21  
Hunter's Avatar
Honda-Tech Member
 
Joined: Feb 2002
Posts: 3,164
Likes: 0
Default Re: does anyone know the piping diameter for the buddy club spec 2 (ARunto)

dang, i'm havin' a hard time thinkin' about what it's gonna sound like. doh! still no one has any sound clips from outside the car?
Reply
Old Sep 23, 2002 | 04:31 PM
  #22  
Casey's Avatar
Honda-Tech Member
20 Year Member
Liked
iTrader: (5)
 
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Default Re: does anyone know the piping diameter for the buddy club spec 2 (Hunter)

anyone
Reply
Old Sep 23, 2002 | 05:09 PM
  #23  
Hooch'n's Avatar
Member
 
Joined: May 2001
Posts: 8,201
Likes: 1
From: Notgrapebutgreat, S.C./N.C., USof A
Default Re: does anyone know the piping diameter for the buddy club spec 2 (CWTypeR463)

It is a strait pipe.......sounds better then an N1.
Reply
Old Sep 23, 2002 | 05:15 PM
  #24  
Casey's Avatar
Honda-Tech Member
20 Year Member
Liked
iTrader: (5)
 
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Default Re: does anyone know the piping diameter for the buddy club spec 2 (Hooch at 8400-RPM)

hahaha better=louder?
Reply
Old Sep 23, 2002 | 05:58 PM
  #25  
ARunto's Avatar
Honda-Tech Member
 
Joined: Apr 2000
Posts: 1,330
Likes: 0
From: Indianapolis, IN
Default Re: does anyone know the piping diameter for the buddy club spec 2 (CWTypeR463)

hahaha better=louder?
yup
Reply



All times are GMT -8. The time now is 11:40 PM.