For Sale and WTB - November 2010
All parts are to be ITR related or it will be removed.
All items for sale must have a price posted or the item will be removed.
If someone posts a FS price and you disagree, don't buy or comment on it.
Anyone posting multiple items please try to use one post.
Don't quote a post with all the pics repeated, or don't quote your own post.
Comments need to be through email or PM.
All items for sale must have a price posted or the item will be removed.
If someone posts a FS price and you disagree, don't buy or comment on it.
Anyone posting multiple items please try to use one post.
Don't quote a post with all the pics repeated, or don't quote your own post.
Comments need to be through email or PM.
Silver Volk TE-37 16x7, 4x114 (JDM 96-spec size) +33 offset
Asking $1200 obo...not really sure the market on these wheels as they seem to be pretty rare in this configuration.
I need to downsize on the amount of wheels here. I wanted to use these but have not got around to it.
Condition is used: some scratches, one wheel has a decent curb mark on the exterior, balance and mount great though



These wheels are very rare in this size/spec! I have yet to find another set like them.
....
Mugen Intake
Condition is good, missing the wheelwell bracket and the bracket by the air filter. I bought it like this and did not know they were missing. They are not relevant though.
Asking $550 obo

...
ITR Motor Mounts
They're roughly 2 years old, original rubber, all 5 mounts. I'm not sure of the mileage, but visibly look good. I replaced them with some Mugen Mounts to tighten up a few things. These could be great for a rebuild or a swap into an EG. I'm unsure on price, so...
Asking $150 obo...definitely more flexible with pricing on these.

...
Stock JDM 96 spec ITR wheels
I got them painted blue/green. I stripped the outside of them and painted them this faux powder coat graphite color. It will strip right off and can be painted whatever. They were completely balanced and straight when I had them on the balance machine in early July.
Asking NEW PRICE $375 obo


...
FS: Mugen front and rear strut tower bars
Asking $250 each, or $450 for both.
Rear bar:

Front bar:

Condition between the two are the same. They're not mint, but they're in very good to excellent condition.
...
Stock Honda steering wheel
This came off a 96-spec JDM ITR with SRS. This was prior the JDM ITR SRS Momo wheel from the 98-spec. It's essentially just like our wheels, but with the Honda logo instead of the Acura on the airbag. It does not have cruise controls.
I am more flexible on pricing with some items vs others. I'm sure there are plenty of people who will vouch more if you have any concerns. Thanks for looking!
Asking $1200 obo...not really sure the market on these wheels as they seem to be pretty rare in this configuration.
I need to downsize on the amount of wheels here. I wanted to use these but have not got around to it.
Condition is used: some scratches, one wheel has a decent curb mark on the exterior, balance and mount great though



These wheels are very rare in this size/spec! I have yet to find another set like them.
....
Mugen Intake
Condition is good, missing the wheelwell bracket and the bracket by the air filter. I bought it like this and did not know they were missing. They are not relevant though.
Asking $550 obo

...
ITR Motor Mounts
They're roughly 2 years old, original rubber, all 5 mounts. I'm not sure of the mileage, but visibly look good. I replaced them with some Mugen Mounts to tighten up a few things. These could be great for a rebuild or a swap into an EG. I'm unsure on price, so...
Asking $150 obo...definitely more flexible with pricing on these.

...
Stock JDM 96 spec ITR wheels
I got them painted blue/green. I stripped the outside of them and painted them this faux powder coat graphite color. It will strip right off and can be painted whatever. They were completely balanced and straight when I had them on the balance machine in early July.
Asking NEW PRICE $375 obo


...
FS: Mugen front and rear strut tower bars
Asking $250 each, or $450 for both.
Rear bar:

Front bar:

Condition between the two are the same. They're not mint, but they're in very good to excellent condition.
...
Stock Honda steering wheel
This came off a 96-spec JDM ITR with SRS. This was prior the JDM ITR SRS Momo wheel from the 98-spec. It's essentially just like our wheels, but with the Honda logo instead of the Acura on the airbag. It does not have cruise controls.
I am more flexible on pricing with some items vs others. I'm sure there are plenty of people who will vouch more if you have any concerns. Thanks for looking!
Last edited by cheezthis; Nov 9, 2010 at 07:50 PM.
WTB:
Type R nose mask for 98-01 fitment ***Bought one. Thanks John M***
Honda Access window visors ***Bought some. Thanks mojo_jojo77777***
OEM ITR intake (airbox & intake arm)
OEM USDM ITR exhaust manifold with heatshield
Type R nose mask for 98-01 fitment ***Bought one. Thanks John M***
Honda Access window visors ***Bought some. Thanks mojo_jojo77777***
OEM ITR intake (airbox & intake arm)
OEM USDM ITR exhaust manifold with heatshield
Last edited by etank82; Nov 6, 2010 at 05:58 PM.
FS:
Jim Fab solid mounts - $275
Authentic Mugen Gen II Spoiler - $1000
Toyo R888 in 225/45/16 with a single HPDE session $500
ITR short block with JDM P30 pistons and Mugen oil pan - $1600
ITR Trans with ATS 4.9 FD installed and Excedy FW - $1800
Edelbrock 65mm TB - $250
Edelbrock Performer X IM - $250
All items less than 3k miles, some with only 100 miles on them.
Pics available upon request.
Jim Fab solid mounts - $275
Authentic Mugen Gen II Spoiler - $1000
Toyo R888 in 225/45/16 with a single HPDE session $500
ITR short block with JDM P30 pistons and Mugen oil pan - $1600
ITR Trans with ATS 4.9 FD installed and Excedy FW - $1800
Edelbrock 65mm TB - $250
Edelbrock Performer X IM - $250
All items less than 3k miles, some with only 100 miles on them.
Pics available upon request.
I have 3 sets of 2 Swift 60mm (2.25") Premium Race Springs - 7" for sale in 16kg, 18kg, and 20kg. These are brand new. Never used. Just a few minor scuff from shipping to me. $150 for one set. $290 for two sets. All 3 sets for $425. Buyer pays all shipping cost. Paypal is an extra 3%. I am located in Sacramento, CA.
Description: 2 - 16kg Swift 60mm (2.25") Premium Race Springs
Condition: New

Description: 2 - 18kg Swift 60mm (2.25") Premium Race Springs
Condition: New

Description: 2 - 20kg Swift 60mm (2.25") Premium Race Springs
Condition: New
Description: 2 - 16kg Swift 60mm (2.25") Premium Race Springs
Condition: New

Description: 2 - 18kg Swift 60mm (2.25") Premium Race Springs
Condition: New

Description: 2 - 20kg Swift 60mm (2.25") Premium Race Springs
Condition: New
Trending Topics
All Prices Are Firm Shipped
ITR Front Strut Bar MINT $90 Shipped

ITR Rear Upper Control Arms $30 Shipped
ITR Rear Springs and Shocks $90 Shipped
ITR JDM Cluster 96Spec 98,XXXkm $115 Shipped
ITR Front Strut Bar MINT $90 Shipped

ITR Rear Upper Control Arms $30 Shipped
ITR Rear Springs and Shocks $90 Shipped
ITR JDM Cluster 96Spec 98,XXXkm $115 Shipped
Last edited by JDM_DAKiD; Nov 6, 2010 at 08:11 PM.
FS: Full black carpet out of a 2001 ITR
Great shape w/ no rips or tears. Includes the two plastic trim pieces on both driver and passenger side. Only blemish is a small stain behind center console (as seen in pics). Previous owner had half a coke can tip over. I never got around to shampooing the carpet. If it was going in my vehicle, although its in great shape, I would recommend it.
$200 shipped anywhere in the Continental US
$205 if using paypal
Very firm on pricing. I'm in no rush to sell, as I may need this for a project in the future.

Great shape w/ no rips or tears. Includes the two plastic trim pieces on both driver and passenger side. Only blemish is a small stain behind center console (as seen in pics). Previous owner had half a coke can tip over. I never got around to shampooing the carpet. If it was going in my vehicle, although its in great shape, I would recommend it.
$200 shipped anywhere in the Continental US
$205 if using paypal
Very firm on pricing. I'm in no rush to sell, as I may need this for a project in the future.

Last edited by RGoose18; Nov 4, 2010 at 11:02 AM.
Genuine OEM ITR JDM rear strut bar asking 299.99 shipped






.................................................. .................................................. .................
BRAND NEW RARE JDM Fog Light Kit. both left side or right side and Fog Light Switch. asking $425.00 shipped for ever thing








.................................................. .................................................. .................
ITR CHECKERED FLOOR MATS asking 125.00 shipped





they need to be clean'd and there used
.................................................. .................................................. .................
Spoon 2gen wheel SOLD
.................................................. .................................................. .................
Carbon interior box itr $50.00 shipped




.................................................. .................................................. ..................
MOMO button $40.00 shipped


.................................................. .................................................. ..................






.................................................. .................................................. .................
BRAND NEW RARE JDM Fog Light Kit. both left side or right side and Fog Light Switch. asking $425.00 shipped for ever thing








.................................................. .................................................. .................
ITR CHECKERED FLOOR MATS asking 125.00 shipped





they need to be clean'd and there used
.................................................. .................................................. .................
Spoon 2gen wheel SOLD
.................................................. .................................................. .................
Carbon interior box itr $50.00 shipped




.................................................. .................................................. ..................
MOMO button $40.00 shipped


.................................................. .................................................. ..................
Last edited by jdm ap2 dc2; Nov 2, 2010 at 11:36 AM.
Name: Jarrod
Location: Southern Va. 757 Area.
Means of Contact: PM or email at Redcoupe00@yahoo.com
Paypal/Shipping: Paypal Verified and I will ship
1) USDM B18c5 oil-cooler and all necessary hoses and pipes and o-rigs to install. *Freshly hot-tanked to get oils out. Went turbo and this piece. My motor never spun a bearing so no worries about material being stuck in it. 130 obo*
2)JDM H Centers. Purchased new from ICB. *They are USED but do not have any fading or Knicks. *They are gun-metal in color. *I want 120 shipped for these.
3) Hondata Map Sensor. Brand new. *Purchased for my turbo build and never used it.
100 Shipped.
4) Skunk2 rear camber kit. Used but has less than 15000 miles on the
. 115 obo.
WTB:
-cruise control block off plate for ITR steering wheel. *Acura wants 10 for it new. *
- USDM fender liners, both sides.
- factory front bumper 98+
- factory lip condition doesn't matter 98+
- factory exhaust
- rear strut bar
- mint driver side door panel.*
- factory tweeters with plugs(wiring part. Mine got cut when the car got stolen)
Pictures once my girlfriend loads them. *Emails are sent to my phone, easiest way to contact me.
Location: Southern Va. 757 Area.
Means of Contact: PM or email at Redcoupe00@yahoo.com
Paypal/Shipping: Paypal Verified and I will ship
1) USDM B18c5 oil-cooler and all necessary hoses and pipes and o-rigs to install. *Freshly hot-tanked to get oils out. Went turbo and this piece. My motor never spun a bearing so no worries about material being stuck in it. 130 obo*
2)JDM H Centers. Purchased new from ICB. *They are USED but do not have any fading or Knicks. *They are gun-metal in color. *I want 120 shipped for these.
3) Hondata Map Sensor. Brand new. *Purchased for my turbo build and never used it.
100 Shipped.
4) Skunk2 rear camber kit. Used but has less than 15000 miles on the
. 115 obo.
WTB:
-cruise control block off plate for ITR steering wheel. *Acura wants 10 for it new. *
- USDM fender liners, both sides.
- factory front bumper 98+
- factory lip condition doesn't matter 98+
- factory exhaust
- rear strut bar
- mint driver side door panel.*
- factory tweeters with plugs(wiring part. Mine got cut when the car got stolen)
Pictures once my girlfriend loads them. *Emails are sent to my phone, easiest way to contact me.
FS: OEM itr front lip. Black, needs paint for sure, maybe some repair work. Best offer.
Prefer someone local to pick it up.
wtb: Front emblem! Must be in honda wrapping. Don't want ebay junk.
PM me.
Prefer someone local to pick it up.
wtb: Front emblem! Must be in honda wrapping. Don't want ebay junk.
PM me.
for pacfic northwest people i have a mugen bumper, mugen lip, mugen sideskirts, mugen gen1 wing for sale for dc2 all authentic, and multiple oem jdm itr front bumpers with lips and grills
and for the rest of you:
integra type r 5lug for regular 32mm axles, no ebrake cables, everything you need though if you already have rear disc brakes everything is in good condition i pulled this off my car before i sold it
$1000 shipped to west coast, $1050 shipped to east
and for the rest of you:
integra type r 5lug for regular 32mm axles, no ebrake cables, everything you need though if you already have rear disc brakes everything is in good condition i pulled this off my car before i sold it
$1000 shipped to west coast, $1050 shipped to east
FS:
USDM Type R center caps gunmental/gray in color great condition
SOLD!!!
JDM Type R center cap championship white only have one great condition
$30
JDM DC5 Type R center caps champion ship white great condition 2 of them
$50
Any question let me know. All the prices include shipping if you are in 48 states.
USDM Type R center caps gunmental/gray in color great condition
SOLD!!!
JDM Type R center cap championship white only have one great condition
$30
JDM DC5 Type R center caps champion ship white great condition 2 of them
$50
Any question let me know. All the prices include shipping if you are in 48 states.
Last edited by jdm_94; Nov 9, 2010 at 03:41 AM. Reason: Update
Description: Desmond RegaMaster EVO 16x8 +35 5x114.3
Condition: Used with brand new valve stems
Price: $1600 Picked Up or $1750 Shipped
Click here for more pictures

Description: Desmond RegaMaster EVO 16x7 +35 5x114.3
Condition: Used with brand new valve stems
Price: $1450 Picked Up or $1600 Shipped
Click here for more pictures

Description: Mugen MZ3X 16x6 +53 5x114.3
Condition: Used
Price: $565 Picked up or $700 Shipped
Click here for more pictures
Condition: Used with brand new valve stems
Price: $1600 Picked Up or $1750 Shipped
Click here for more pictures
Description: Desmond RegaMaster EVO 16x7 +35 5x114.3
Condition: Used with brand new valve stems
Price: $1450 Picked Up or $1600 Shipped
Click here for more pictures
Description: Mugen MZ3X 16x6 +53 5x114.3
Condition: Used
Price: $565 Picked up or $700 Shipped
Click here for more pictures
Last edited by Spids5; Nov 28, 2010 at 10:59 AM.
FS: 98-01 USDM ITR Rear Seats
Condition: 8/10
Price: $225 OBO Shipped
Location: N. Florida
Seats are in great shape. Small rip on the top of the passenger side by pull release. Very little fading. $225 OBO Shipped
Can send pics via E-mail, lefty_srt4@yahoo.com or via text, (386)984-0673
Thanks, Matt
Condition: 8/10
Price: $225 OBO Shipped
Location: N. Florida
Seats are in great shape. Small rip on the top of the passenger side by pull release. Very little fading. $225 OBO Shipped
Can send pics via E-mail, lefty_srt4@yahoo.com or via text, (386)984-0673
Thanks, Matt
Honda-Tech Member
Joined: Mar 2007
Posts: 199
Likes: 0
From: Autobahnland, A96/A99/A92/A9/A4 - 255 kph ITR speed, and it´s legal!
For sale
A set JDM OEM Yellow Recaros Seat, cleaned. All pictures are taken at daylight with flashlight. There are no rails/consoles included. The fitment for the rails is the same as for every OEM Recaro seat.
*** shipping to Europe (Germany: 20€, Austria: 35€, other countries: ask me), USA & Canada - 90€ by DHL Post Service (secure, tracking number, ensured)
Pics: (the mark on the backside of one seat will be cleaned away, I´ve noticed that that there is a spot, no need to worry)













What you see is what you get. The seat will come in one packet, wrapped in bubble-foil and some covers. No worry for damaging or getting dirty while the way via airmail.
Price: 1400 € o.b.o. (make me an offer in €uro, not $)
import tax: there will be a way *cough*
Trading: yes, but not for JDM Red or Black DC2 seats. Just feel free to make an offer via PN or ICQ.
Payments:
if you prefer Paypal -> you pay transfer in €uro incl. Paypal costs
My transactions:
http://hondapower.de/forum/showthread.php?t=49784
Regards from Germany,
Christian
edit: high res pics ...












A set JDM OEM Yellow Recaros Seat, cleaned. All pictures are taken at daylight with flashlight. There are no rails/consoles included. The fitment for the rails is the same as for every OEM Recaro seat.
*** shipping to Europe (Germany: 20€, Austria: 35€, other countries: ask me), USA & Canada - 90€ by DHL Post Service (secure, tracking number, ensured)
Pics: (the mark on the backside of one seat will be cleaned away, I´ve noticed that that there is a spot, no need to worry)













What you see is what you get. The seat will come in one packet, wrapped in bubble-foil and some covers. No worry for damaging or getting dirty while the way via airmail.
Price: 1400 € o.b.o. (make me an offer in €uro, not $)
import tax: there will be a way *cough*
Trading: yes, but not for JDM Red or Black DC2 seats. Just feel free to make an offer via PN or ICQ.
Payments:
if you prefer Paypal -> you pay transfer in €uro incl. Paypal costs
My transactions:
http://hondapower.de/forum/showthread.php?t=49784
Regards from Germany,
Christian
edit: high res pics ...

No Sales Forums
iTrader: (3)
Joined: May 2004
Posts: 4,136
Likes: 0
From: code of the streets, ca, usa
For Sale:
-JDM DC2 98 Spec HID's (Includes Bulbs & No Broken Tabs) $650 Shipped
-JDM DC2 Gathers CF Dual Radio w/Remote $420 Shipped
-JDM DC2 96 Spec Cluster (69,990k) $125 Shipped
-JDM DC2 98 Spec Cluster (64,383k) $125 Shipped
-JDM DC2 Car Cover $250 Shipped
-JDM DC2 ITR Rear Optional Strut Bar $225 Shipped
-Azect DC2 ITR Eyelids $275 Shipped w/OEM Grill
-A-Sports Adjustable Honda Shift Lever $175 Shipped
-HKS Super Mega Flow Intake DC2R $125 Shipped or $150 w/Gold Cage (Bnib)
-Toda Racing 1st Gen Cam Gears $300 Shipped
-Spoon Sports DC2 Plastic Mirrors $600 Shipped
-Spoon Sports 1st Gen Cam Gears $450 Shipped
-Spoon DC2 Filter (Bnib) $150 Shipped
-Spoon DC2 Filter (Used) $100 Shipped
-Spoon DC2 Carbon Mirrors (MINT) $425 Shipped
-Spoon SW388's 16x7 5x114.3 w/Tires $1800 Shipped
-Mugen 1st Gen Front Tower Bar $500 Shipped
-Mugen DC2 Intake (MINT) $650
-DC2 Miracle Bar Type 2 (MINT) $450 Shipped
Pictures: http://hondamarketplace.com/showthread.php?t=2809373
-JDM DC2 98 Spec HID's (Includes Bulbs & No Broken Tabs) $650 Shipped
-JDM DC2 Gathers CF Dual Radio w/Remote $420 Shipped
-JDM DC2 96 Spec Cluster (69,990k) $125 Shipped
-JDM DC2 98 Spec Cluster (64,383k) $125 Shipped
-JDM DC2 Car Cover $250 Shipped
-JDM DC2 ITR Rear Optional Strut Bar $225 Shipped
-Azect DC2 ITR Eyelids $275 Shipped w/OEM Grill
-A-Sports Adjustable Honda Shift Lever $175 Shipped
-HKS Super Mega Flow Intake DC2R $125 Shipped or $150 w/Gold Cage (Bnib)
-Toda Racing 1st Gen Cam Gears $300 Shipped
-Spoon Sports DC2 Plastic Mirrors $600 Shipped
-Spoon Sports 1st Gen Cam Gears $450 Shipped
-Spoon DC2 Filter (Bnib) $150 Shipped
-Spoon DC2 Filter (Used) $100 Shipped
-Spoon DC2 Carbon Mirrors (MINT) $425 Shipped
-Spoon SW388's 16x7 5x114.3 w/Tires $1800 Shipped
-Mugen 1st Gen Front Tower Bar $500 Shipped
-Mugen DC2 Intake (MINT) $650
-DC2 Miracle Bar Type 2 (MINT) $450 Shipped
Pictures: http://hondamarketplace.com/showthread.php?t=2809373
2001 usdm integra type r b18c5 block
complete, pistons, rods, crank etc
spun rod bearing cyl 1
$650 picked up, or plus shipping



Type R crank, excellent condition, this is a replacement, not the same one as comes with block
$200

2001 usdm type r midpipe
$150
pics coming soon
EXHAUST IS STILL AVAILABLE, I JUST HAVEN'T GOTTEN A PICTURE YET
complete, pistons, rods, crank etc
spun rod bearing cyl 1
$650 picked up, or plus shipping



Type R crank, excellent condition, this is a replacement, not the same one as comes with block
$200

2001 usdm type r midpipe
$150
pics coming soon
EXHAUST IS STILL AVAILABLE, I JUST HAVEN'T GOTTEN A PICTURE YET



