94 acura integra b18a1 swap. OK so today i tried starting my car mind you i just put the motor together, well i tried starting it it ran for about a couple of second then i turned it off cause i dont have oil in there well i tried starting it again and it didnt start at all so now everytime i try and start it i hear a little putt the just the engine cranking over so i checked the spark it sparks the fuel pump runs i checked that too plus my fuel filter has a gauge on there that goes to about 45psi can anybody help me out?

 

are you kidding you just put a engine together and didnt put oil in before starting??

 

Well put. No oil plus brand new motor = stupidity. Sorry but major to you.

 

the no oil thing is most likely the problem but i would check the timing too. you have everything for the engine to run (i hope now you have oil) so check the timing.

 

Thx blown ss for not being childish like the other two and yes i just got money for a filter so i will be adding oil and i was looking my exhaust is acctually of by a tooth or two so maybe that will also be fixed but could that be the prblem?

 

WHY SO SERIOUS?
If having a sense of humor is childish than i guess so.

There's probaly a ton of metal shavings in you engine now that are gonna go around and tear up your bearings and internals.

You should've never turned your engine over with no oil, it won't break in right eather

Most likely the putt is from the timing, id watch out you might be smackin a valve to a piston, which can cause structural failure

 

Another one bites the dust! Rip B18A1...

 

So sad, too bad, I would not try anything with that engine until it has had a complete tear down and inspection. 94

 

WTF made you think running an engine with no oil would be a good idea?
You do know the purpose of oil right?
Now you had tons of metal on metal contact, not to mention HOT metal on metal contact, lucky it didn't blow up.

Drop your oil pan, it should look like silver confetti!

 

Thats a sig.

 

........WOW I BET YOU PUT WATER IN THE MOTOR TO MAKE UP FOR NOT HAVING OIL.

 

ROFL all u need now is to take the fluid out of the tranny n 2 outta 4 hood hinge bolts n u got mad hp y0.

on a serious note, i would seriously be pissed right now if I were you.

 

need help with a 88 hatch can anyone help???

 

[QUOTE=on a serious note, i would seriously be pissed right now if I were you.[/QUOTE]

HE think's he isnt getting enough fuel.So he might just pour gas though the throttle body and cross his finger's.Also how can you tell by looking at your cam gear's that it is off on the exhaust by two teeth?I mean really is that possible at all?

 

Had to do it:

 

Laughing my f***ing a** off. haha

 

kiss that b18 good bye. LMAO

 

toall of you i wasnt running it without out oil i just cranked it without adding alot since i didnt have a filter but i have found out the problem it was the cap that goes at the end of the harnest for the fuel injectors i took it off not thinking anything of it so SUCK IT

 

You fail at honda's!

 

oh so any oil that u did put in shot right out the filter port cause that's where it goes before it flows to the internals.

Not makin yourself look any smarter....


...previous post....

Yous guys smell that??







Reeks of bullshit

 

wow my 6 year old bro knows not to run a engine without oil

 

this gave me a good laugh before i head to bed....
thanks JorgeD1990

 

How quickly the story changes....................

 

[IMG][/IMG]


[IMG][/IMG]

 

[IMG][/IMG]