****BUILT d16y7 Turbo Engine, READY FOR BOOST!****
Thread Starter
Honda-Tech Member
Joined: Jan 2006
Posts: 527
Likes: 0
From: Star, NC, USA
****BUILT d16y7 Turbo Engine, READY FOR BOOST!****
FS: I have for sale a very good condition built d16y7 turbo engine. I bought everything brand new & everything was installed to tech specs. The engine had exactly 16,128 miles when pulled since I parted car. I am looking to sell the engine complete w/ head and block together. This motor was making 305 whp in my car, revving to 8200 rpm. I would say its limits are around 400 whp with a great tuner. It did not smoke, burn oil, etc..
It is so clean you can eat off of it & ready to be put on the dyno as it sits. Save yourself some headaches from building a vitara single slam & buy one proven to make power! I would like to sell it complete, but if I have two different people interested in the head and block, I will part the two separately.
D16y7 (non-VTEC) TURBO Engine with 16,128 miles
HEAD: $1000
Bisimoto Level 1.2 Custom turbo cam
SuperTech Dual Valve springs w/ titanium retainer set
SuperTech Stainless-Steel Valves w/ nitride coating
Ferrera Racing Steel Valve Locks
Port n’ polished, 3-angle valve job, valve seating, & installation by Ken Auman
Cosmetic Valve Stem seals
(RED) Skunk2 Adjustable Cam Gear
Shaved candy apple red valve cover
All sensors
BLOCK: $800
Eagle H-Beam Rods (notched block)
Vitara pistons (75mm Std. Bore) w/ Nippon Rings
GT1 Teflon coated Thrust Washers
King Main Bearings
King Rod Bearings
ARP HeadStuds
KMS Blockguard
OEM Honda Headgasket
OEM Honda “Gates” Timing Belt- $240.00
OEM Honda Water Pump
Toga High Volume Oil pump
Resurfaced and Lightened OEM flywheel (12 lb)
ARP Flywheel Bolt Kit (208-2801)
Mfactory Oil block adapter (for turbo oil feed line, oil pressure gauge)
All sensors
PICS:
I would like to sell the complete engine with everything stated above for-$1500.
If parted I would like to get $750 for the block & $750 for the head. I can provide actual receipts/ boxes for all parts installed. I need to clean up my dad’s garage.
Contact Info:
Name: Daniel Hurley
Location: Star, NC 27356 (below Asheboro)
Email: PM me or rowdyboyzecu@yahoo.com
It is so clean you can eat off of it & ready to be put on the dyno as it sits. Save yourself some headaches from building a vitara single slam & buy one proven to make power! I would like to sell it complete, but if I have two different people interested in the head and block, I will part the two separately.
D16y7 (non-VTEC) TURBO Engine with 16,128 miles
HEAD: $1000
Bisimoto Level 1.2 Custom turbo cam
SuperTech Dual Valve springs w/ titanium retainer set
SuperTech Stainless-Steel Valves w/ nitride coating
Ferrera Racing Steel Valve Locks
Port n’ polished, 3-angle valve job, valve seating, & installation by Ken Auman
Cosmetic Valve Stem seals
(RED) Skunk2 Adjustable Cam Gear
Shaved candy apple red valve cover
All sensors
BLOCK: $800
Eagle H-Beam Rods (notched block)
Vitara pistons (75mm Std. Bore) w/ Nippon Rings
GT1 Teflon coated Thrust Washers
King Main Bearings
King Rod Bearings
ARP HeadStuds
KMS Blockguard
OEM Honda Headgasket
OEM Honda “Gates” Timing Belt- $240.00
OEM Honda Water Pump
Toga High Volume Oil pump
Resurfaced and Lightened OEM flywheel (12 lb)
ARP Flywheel Bolt Kit (208-2801)
Mfactory Oil block adapter (for turbo oil feed line, oil pressure gauge)
All sensors
PICS:
I would like to sell the complete engine with everything stated above for-$1500.
If parted I would like to get $750 for the block & $750 for the head. I can provide actual receipts/ boxes for all parts installed. I need to clean up my dad’s garage.
Contact Info:
Name: Daniel Hurley
Location: Star, NC 27356 (below Asheboro)
Email: PM me or rowdyboyzecu@yahoo.com
Last edited by JDMvirginNC; Dec 7, 2010 at 12:15 PM.
![[Ennis_D]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999395163_2.gif){kind=avatar}
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jan 2006
Posts: 527
Likes: 0
From: Star, NC, USA
Re: ****BUILT d16y7 Turbo Engine, READY FOR BOOST!****
Hey man, yeah I am looking to sell my turbo kit. I will work you a deal. Just let me know. Everything is in awesome condition with lifetime warranty on welds with Arizona Forced Induction. I paid $2500 for the kit brand new. I posted the kit for sale in link below.
http://www.hondamarketplace.com/show....php?t=2867116
http://www.hondamarketplace.com/show....php?t=2867116
Thread
Thread Starter
Forum
Replies
Last Post
titi_vtec
Honda Civic / Del Sol (1992 - 2000)
12
Nov 3, 2012 05:34 PM
TealCivic115
Forced Induction
6
Aug 27, 2011 03:27 PM
MujetDereh
Vehicles for sale
3
Jul 14, 2007 10:56 AM
elderjoe
Honda Accord (1990 - 2002)
6
Jan 28, 2004 05:41 PM
