fs/ftteal 93 eg coupe
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Sep 2008
Posts: 983
Likes: 0
From: Racine, WI, united states
i have for sale/trade a teal eg coupe with a built b20vtec.. I WANT SOMETHING BOOSTED AND WORTH THE TRADE
my buddy did a compression test bank 1 270 bank 2 265 bank 3 265 bank 4 270
motor only has 300 miles no leaks or burns, pulls hard, and spins
motor
-bottom end
b20b4
decked. cleaned. and honed to 84.5mm
crower ultra light rods that are custom length
endyn roller wave pistons 12:5:1 (rated for stock rods before decking the block and resurfacing the head)
crank was micropolished and balanced
new oem water pump
new oem bearing
new piston rings
type r oil pump
stock oil pickup
new main seal.
new oil pan gasket
blueprint b20v head gasket 84.5mm
billet aluminum ud pulley only for alt.
-b16 head (freshly rebuilt)
type r valves
type r springs
type r retainers
type r valves seals
3 angle valve job along with a port and polish
new dizzy with ngk wires
bdl cam gears
toda timing belt
edelbrock performer x intake mani
68mm throttle body
-trans (s4c)
b16a2 trans rebuilt with carbon synchros and a type r differential
act stage 2 clutch
act 7.5lb flywheel
-exhaust
spark header (custom 4-2-1)
2.5 inch midpipe
test pipe
and apexi wsp axle back
-suspension
stock struts with lowering springs in the front
stock struts with ebay coils in the rear
additional parts that come with the car
carbon fiber fenders
walbro fuel pump
slicks withs steelies
and rota slips with no tires
and numerous misc parts
looking mainly for a clean del sol or eg coupe plus cash even trade or just cash, 5500
262 995 8080
my buddy did a compression test bank 1 270 bank 2 265 bank 3 265 bank 4 270
motor only has 300 miles no leaks or burns, pulls hard, and spins
motor
-bottom end
b20b4
decked. cleaned. and honed to 84.5mm
crower ultra light rods that are custom length
endyn roller wave pistons 12:5:1 (rated for stock rods before decking the block and resurfacing the head)
crank was micropolished and balanced
new oem water pump
new oem bearing
new piston rings
type r oil pump
stock oil pickup
new main seal.
new oil pan gasket
blueprint b20v head gasket 84.5mm
billet aluminum ud pulley only for alt.
-b16 head (freshly rebuilt)
type r valves
type r springs
type r retainers
type r valves seals
3 angle valve job along with a port and polish
new dizzy with ngk wires
bdl cam gears
toda timing belt
edelbrock performer x intake mani
68mm throttle body
-trans (s4c)
b16a2 trans rebuilt with carbon synchros and a type r differential
act stage 2 clutch
act 7.5lb flywheel
-exhaust
spark header (custom 4-2-1)
2.5 inch midpipe
test pipe
and apexi wsp axle back
-suspension
stock struts with lowering springs in the front
stock struts with ebay coils in the rear
additional parts that come with the car
carbon fiber fenders
walbro fuel pump
slicks withs steelies
and rota slips with no tires
and numerous misc parts
looking mainly for a clean del sol or eg coupe plus cash even trade or just cash, 5500
262 995 8080
Last edited by jrp355; Oct 4, 2010 at 04:40 PM.
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Sep 2008
Posts: 983
Likes: 0
From: Racine, WI, united states
lookin around 5500 - price of parts and machine work is about 3500 minus assembly...motor has about 200 miles on it as of now. and i am still breaking in the motor. and lets see this pretty clean ek, the civic has no rust in the quarters or rockers
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
proracer718
For Sale
34
Jul 28, 2009 11:32 AM
N~FaMouSKhMerBoi
Want to Buy
17
Nov 5, 2002 08:27 PM





