Whats up Honda-tech. What i got here is a almost complete b20 vtec setup ready for someone to assemble it. It was for my EG hatch but i've lost interest and i want to get a new car. This was gonna be a no cheap out setup. The bottom end consist of a b20z thats been machined out at Burtonsville Machine Shop. I got RS machine pistons ($300) eagle rods with arp ($300) ready to be assembled in them. the pins were resized to fit the pistons. I also have ACL Duraglides ready to go ($100). So thats $700 in parts not including the block and machine work ($800 for machine work). The head also got top of the line treatment. The Valvetrain consist of all supertech springs and retainers ($350) the valves were cleaned at the machine shop and received brand new valve seals. They also performed a street port and polish ($900) and i have the gasket kit from honda/world pac for a b16 head so that you can change all the seals and everything ($120) all you would need to get is the 84.5mm head gasket and arp bolts to finish the assembly of this long block. the value of this all cost me about $3000+ in parts machining and for the block and head but i will let it for $2000 because i really need the money. If you're interested just PM me or text/call 301.602.7539 prefer text since im usually at work but you can leave a message. I would like to sell by this week. please dont waste my time with bull **** offers.

 

bump make some offers!

 

yo would you be willing to sell me just the eagle h beam rods with the arp rod bolts and the ace bearings? if so pm me how much.

 

any chance you have the compressor bracket from the b20?