long story short i got until friday to fab up a dumptube for my tial 44mm wg. i searched and searched can not find anything. i had to go to my good friends funeral so this really wasnt more important. is there anyway i can buy some piping and flange at my local parts store and make one or something?. i have a welder machine and im not the best welder but not the worst. so ordering one is out. so if your able to direct me and tell me how to do it i will appreciate it.

 

anybody plz i really need to get this done i cant miss my tune date

 

your not going to find a flange + clamp at your local parts store.

 

i have the clamp already

 

you wont find a tial flange anywhere like that

 

the flange is hard to find. i just made a dumptube to go out of my bumper for my 44mm tial. ordered my stuff from atpturbo. flange + 1.75" stainless piping came out to about 100 bucks.


if you have the flange you can weld a little piece of metal on it then go to the parts store and get the flexible piping and put that on there, just so you can route it the easiest way out and away from the turbo inlet. it will also make a nice template to copy when you order the piping and make a final version