homemade dumptube asap ...
08-31-2010, 01:35 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
homemade dumptube asap ...
long story short i got until friday to fab up a dumptube for my tial 44mm wg. i searched and searched can not find anything. i had to go to my good friends funeral so this really wasnt more important. is there anyway i can buy some piping and flange at my local parts store and make one or something?. i have a welder machine and im not the best welder but not the worst. so ordering one is out. so if your able to direct me and tell me how to do it i will appreciate it.
08-31-2010, 07:11 PM
#6
Honda-Tech Member
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
Re: homemade dumptube asap ...
the flange is hard to find. i just made a dumptube to go out of my bumper for my 44mm tial. ordered my stuff from atpturbo. flange + 1.75" stainless piping came out to about 100 bucks.
if you have the flange you can weld a little piece of metal on it then go to the parts store and get the flexible piping and put that on there, just so you can route it the easiest way out and away from the turbo inlet. it will also make a nice template to copy when you order the piping and make a final version
if you have the flange you can weld a little piece of metal on it then go to the parts store and get the flexible piping and put that on there, just so you can route it the easiest way out and away from the turbo inlet. it will also make a nice template to copy when you order the piping and make a final version
Thread
Thread Starter
Forum
Replies
Last Post
mike1114
Forced Induction
2
12-16-2003 05:04 AM
NeXtLeVeL_TyPe_R
Forced Induction
2
04-20-2002 12:07 PM
