This is the official ALL MOTOR classifieds thread for September - October.

**Rules**

- Each post must be started with FS OR WTB
- Do not reply or quote posts in this thread, PM for all questions
- Please do not post/type in ALL CAPS

What you CAN post in this thread:

- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC

What you CANNOT post in this thread

- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts


Any violations of these basic rules, and the post will be deleted. You may or may not be issued infractions and you will lose participation in this thread.

 

If you see someone in violation of these very basic rules..

Please report the post by click this icon ''''

 

DELETE

 

FS::
Up for sell is my all motor 11.5cr 2.0L B18B laskey racing built block..it.fresh 0 miles since being built,laskey charges $3,050 ....this block is perfect for a street motor,reliable and ready to make some serious power....and if your a turbo guy just change out the pistons for some lower CR. pistons and boost safetly...for those that know about laskey racing know that they build good reliable motors that make power.....heres the link to thier builds

Im aslo willing to trade for a reliable daily driver or wheels.

!!!!!! $ 2,500 obo !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!
get this outta my house


**TEXT ME AT 909-520-7254**

http://laskeyracing.com/shop/bseries.htm


Benson sleeved block
Benson balanced and micropolished crank
84mm CP pistons and rings
eagle rods
oem bearings
OEM (TypeR) oil pump
and water pump
Lower gasket set
Blueprint and assembly



Doesnt someone want some real allmotor power...stop buying those weak *** stock motors...all it needs is a nice head and tranny setup

 

FS or trade
open for trades or money..

brand new skunk 2 tunner 2 cams in box make offer {sold}
120k gsr cams and cam gears $100 obo
92 ls b18b1 head 146k complete $100 + shipping
skunk2 rear strut tower bar, used small abuse ( acouple small scratches)
gsr intake mani 120k $50 + shipping

^

 

For Sale:
Parting out my All Motor B-series motor along with extra parts i have laying around and going a different route. All parts either have 12 1/4 mile passes on them or 6 dyno pulls it will be noted on the side of the item. Also all of the Skunk 2 parts are pretty much brand new with the pro-series valve springs, retainers, throttle body and composite fuel rail having the 6 dyno pulls and I still have all the boxes for the Skunk2 parts. I will sell stuff as a package if you like if you would like to keep stuff together. Prices do not include shipping unless noted. So here’s the list:

ECU:
Hondata s300 w/ p28 - $650

Engine:
Skunk 2 Pro3 cams-$500(has 12 ¼ mile passes)
Skunk 2 Pro series valve springs-$275(6 dyno pulls)
Skunk 2 B/H Dohc vtec retainers-$175 (6 dyno pulls)
Skunk 2 Pro series Black 70mm throttle body-$300 (6 dyno pulls)
Skunk 2 Pro Series cam gears-$150(12 ¼ mile passes)
Skunk 2 black composite fuel rail-$175 (6 dyno pulls)
Edlebrock Victor X GSR intake manifold Throttle body opening is ported to 70mm-$250 (6 dyno pulls)
RC 550cc injectors-$200 (12 ¼ mile passes)
Pauter 4340 rods for B18A/B-$650 (12 ¼ mile passes)
OEM LS 89mm crank-$150
Canton 15-962 steel “L” sump oilpan all b-series-$250 (12 ¼ mile passes)
85MM RS Machines sleeved B18a block with a GSR girdle ARP mains and head studs-$700 (12 ¼ mile passes)
Six Sigma Racing custom side exit header-$800
Valve cover with -10 bungs for breather kit-$150
B&R polished breather kit with black -10 fittings and lines -$150
Vtec solenoid-$40
GSR water necks with -16 bungs welded for AN fitting radiator setup-$60
Golden Eagle oil sandwich plate, line and fitting for vtec conversion-$100
Skunk 2 Black series billet wire cover-$120
OBD 1 alternator has been polished and in perfect working order-$80
Fluidamper B-series race series pulley pn=620601-$350 shipped
ACT streetlite flywheel-$175
ACT 4 puck sprung hub-$100
ACT Maxx extreme pressure plate-$100
JDM 98+spec ITR LSD transmission with ATS 4.9 final drive shifts perfectly-$1400
B-series axels-$100
half shaft-$60
GSR head parts (rockers, caps, rails, lost motion assembly) let me know what you need


Extra motor parts:
Eagle 95mm stroker crank-$500 brand new
Crower 4340 Steel billet rods for b18a/b-b20b-$400
1 more 85mm RS machines sleeved b18a block with z10 girdle ARP Mains and headstuds this one for sure will need to be bored out to 86mm-$300

Swap parts:
Innovative eg/dc solid motor mounts GOLD dipped done by SIK industries here in Santa Clara,CA-$350
DC rear T bracket also in GOLD dipped done by SIK industries -$80
ITR gold shift linage with prothane bushings and Skunk2 dual bend short shifter and Skunk2 shift ****-$150

That’s it for now I will get pictures up of everything as i start taking it apart. Prices are firm but all reasonable offers will be considered and please be reasonable…I spent the money for quality parts and so should you!
Email me for any questions 11secwkeg@gmail.com

 

-Sparks racing header, b-series, tri-y design, great condition, 2.5" collector, no scrapes, dents, cracks or nothing....$475obo + shipping costs

http://i22.photobucket.com/albums/b3...d/DSC01922.jpg
http://i22.photobucket.com/albums/b3...m/DSC03529.jpg
http://i22.photobucket.com/albums/b3...m/DSC03521.jpg


pm me if interested

 

FS.. 12.5 compression 81mm je pistons...pin,locks and new hasting rings included..$250 shipped..

 

wtb: jenvey itb's for b16/c5 head.

 

F/S:
1. Perfect condition GSR Crank. $150 shipped
2. AEBS Used GSR Headstuds. Torqued twice to my knowledge. Washers included but unpictured. $70 Shipped
3. ITR Flywheel, will need a resurface $100 shipped
4. AEBS B16/ITR Intake manifold. Repainted vht aluminum. IAT included $120 shipped
5. Virgin OBD1 P72 USDM ECU. $110 Shipped

http://i970.photobucket.com/albums/a...z/DSC_5792.jpg
http://i970.photobucket.com/albums/a...z/DSC_5795.jpg
http://i970.photobucket.com/albums/a...z/DSC_5787.jpg
http://i970.photobucket.com/albums/a...z/DSC_5569.jpg
http://i970.photobucket.com/albums/a...z/DSC_5601.jpg

 

Want to buy some skunk2 pro2 for h22 used. pm me

 

Almost new set of Jun Stage 2 cams. Got them off a friend and they only have a tad under 2k miles on them. The cams have etching on the ends listing the part numbers to prove their authenticity. I don't currently have the part numbers with me, but can list them later or send pics upon request. I bought these for $950, which is about $300 under what most sites list them for brand new. So to start I will list them at $900 shipped. I really need the cash though so just shoot me a reasonable offer and we can work something out.

 

I have a 2.2 (2224cc) B-Series (85mm X 98mm) Long Block
Only a few hours on it.
Includes:
Castillo's 98mm B20a reworked crank
CP Custom 85mm 15:1 slugs
Crane / Ferrera Roller Cam System Custom Grind (.520 lift)
AIR Intake with Bosch Blue Top Injectors setup for Methanol
Custom Cunningham Ultra-light rods – 6.1” length, 420 grams.
Endyn b16a Head - Flowed 301 CFM at .500 lift on PortFlow's Superflow SF-600
Golden Eagle sleeves and deck riser
ARP fasteners throughout - Head Studs, Main Studs

 

Clutch Masters FX700 Twin Disc with QSD H2B flywheel. Used for about 15 passes. $800 + shipping. located in so cal

 

SOLD

 

WTB skunk 2 intake mani

 

For sale one set of used Buddy Club Spec 3+ camshafts. Ran out of money for my build so they need to go. Comes with original boxes. $250 shipped.




found the original boxes

 

For Sale:
Authentic Hytech B series Header
I have another header in mind so this unfortunately has to go.
the header has two scrapes at the bottom. no major gashes or anything like that. Originally ATS*Mark's


$650 obo





Thanks

 

B16/GSR Eagle rods & Wiesco 81mm Forged 10.1 CR pistons w/ rings BNIB

250 for the rods and 250 for the pistons

 

The Wiseco catalog lists that part number as having compression numbers at 9.8 - 10.2, so some one has it wrong?

The dome looks quite small to me however can't judge the compressin height?

 

thx for correcting that.

 

Sold- injectors.

Rocket Motorsport M22x cams, very good condition, made over 200whp on my 1.8L R motor. Extremely easy to tune and dial in, I love these cams. $450 shipped to you.

 

Fs b20vtec setup brand new from machine shop. this motor hasn't been assembled yet. it comes with eagle rods rs pistons b20z block bored honed decked and washed. the head is a b16 head supertech valve train new oem seals port polish and performance valve job
im asking 2000 obo

 

F/S: GSR Performer X intake manifold - $375
- w/ Professional Products 68mm throttle body & insulating gasket
- 1k miles & port matched

 

b16 head ported by steve deandrea at cccylinderheads.com.full race packege supertech valvetrain and flatfaced valves taped for lsv ge oil sandwich plate with lines for vtec and stepped dowl pins will come with head$900






850$hydro b16 y21 tranny w/ obx lsd no grids smooth as butter





shipping is buyers responsibility im located in kansas city mo 64119