H22 Turbo ready block : JE pistons, Crower rods and rod bolts
Thread Starter
Honda-Tech Member
Joined: Nov 2005
Posts: 2,359
Likes: 0
From: nine zero nine, CA
H22 Turbo ready block : JE pistons, Crower rods and rod bolts
SOLD
Im selling my old block, ran it in the car for a while, good motor, compression is good.
Boosted it but never tuned it or beat on it, only drove it to nisei and eibach.
US block, JE low comp pistons with crower rods and rod bolts.
Stock bore, probably throw in the ARP head studs they should be good still.
Burns a small amount of oil which is very common for H-series,
you may wanna replace the rings thats about it
$SOLD
I dont check this a lot so hit me up on aim or text
909-938-2431
AIM - jdmdarko
Im selling my old block, ran it in the car for a while, good motor, compression is good.
Boosted it but never tuned it or beat on it, only drove it to nisei and eibach.
US block, JE low comp pistons with crower rods and rod bolts.
Stock bore, probably throw in the ARP head studs they should be good still.
Burns a small amount of oil which is very common for H-series,
you may wanna replace the rings thats about it
$SOLD
I dont check this a lot so hit me up on aim or text
909-938-2431
AIM - jdmdarko
Last edited by jdmcd7_cali-luv; Jan 11, 2011 at 05:18 PM.
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
