FULL DRAG B SERIES BLOCK, SLEEVED, ALUM RODS, CUSTOM, CHEAP!!
Honda-Tech Member
Joined: Jan 2010
Posts: 550
Likes: 1
From: norcal
Re: FULL DRAG B SERIES BLOCK, SLEEVED, ALUM RODS, CUSTOM, CHEAP!!
is this something that could be run on the street in a daily driver? how much if you go through it and make sure bearings are good and replace rings?
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 3,074
Likes: 0
From: SOCAL, ca, 91702
Re: FULL DRAG B SERIES BLOCK, SLEEVED, ALUM RODS, CUSTOM, CHEAP!!
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 3,074
Likes: 0
From: SOCAL, ca, 91702
Re: FULL DRAG B SERIES BLOCK, SLEEVED, ALUM RODS, CUSTOM, CHEAP!!
GSR Sleeved Block (RS Machines)
Aluminum long Rods (Howards Custom)
Pistons are Custom Short Ross Pistons (Max Dome)
LS 89 Crank
87 Bore RS Sleeved
Block is assembled (has about 10 runs on it) Recommend refresh the bearings and the rings (not necessary (it runs) but i usually do a refresh especially if the motor is already out of the car.
$1400 Shipped. Its a deal. All custom parts. OBO
Sorry i havent got any pics. Its an assembled GSR block. doesnt really look any different than any other sleeved block with high compression pistons.
I'll try and get some pics of it if people really want to see it.
Aluminum long Rods (Howards Custom)
Pistons are Custom Short Ross Pistons (Max Dome)
LS 89 Crank
87 Bore RS Sleeved
Block is assembled (has about 10 runs on it) Recommend refresh the bearings and the rings (not necessary (it runs) but i usually do a refresh especially if the motor is already out of the car.
$1400 Shipped. Its a deal. All custom parts. OBO
Sorry i havent got any pics. Its an assembled GSR block. doesnt really look any different than any other sleeved block with high compression pistons.
I'll try and get some pics of it if people really want to see it.
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 3,074
Likes: 0
From: SOCAL, ca, 91702
Re: FULL DRAG B SERIES BLOCK, SLEEVED, ALUM RODS, CUSTOM, CHEAP!!
GSR Sleeved Block (RS Machines)
Aluminum long Rods (Howards Custom)
Pistons are Custom Short Ross Pistons (Max Dome)
LS 89 Crank
87 Bore RS Sleeved
Block is assembled (has about 10 runs on it) Recommend refresh the bearings and the rings (not necessary (it runs) but i usually do a refresh especially if the motor is already out of the car.
$1400 Shipped. Its a deal. All custom parts. OBO
Sorry i havent got any pics. Its an assembled GSR block. doesnt really look any different than any other sleeved block with high compression pistons.
I'll try and get some pics of it if people really want to see it.
Aluminum long Rods (Howards Custom)
Pistons are Custom Short Ross Pistons (Max Dome)
LS 89 Crank
87 Bore RS Sleeved
Block is assembled (has about 10 runs on it) Recommend refresh the bearings and the rings (not necessary (it runs) but i usually do a refresh especially if the motor is already out of the car.
$1400 Shipped. Its a deal. All custom parts. OBO
Sorry i havent got any pics. Its an assembled GSR block. doesnt really look any different than any other sleeved block with high compression pistons.
I'll try and get some pics of it if people really want to see it.
Custom rods, custom pistons. Sleeved block. It will run the way it is but i always reccomend a refresh. its cheap and might as well since its out of the car.
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
Thread Starter
Honda-Tech Member
Joined: Mar 2007
Posts: 3,074
Likes: 0
From: SOCAL, ca, 91702