FS:gt2560, treadstone, edelbrock, SRE, LS catchcan
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 5,295
Likes: 21
From: Indiana
FS:gt2560, treadstone, edelbrock, SRE, LS catchcan
Going back N/A because I bought another turbo honda that will take over duty as racecar.
Edelbrock T25 B series manifold: $100
Garrett ball bearing GT2560r Turbo, no shaft play, always clean, restricted oil and water cooled, ~10,000 miles. Will come with water cooling fittings and oil inlet and oulet fittings with restrictor as well as the ATP 2" charge pipe adapter. Stock LS made 283whp and almost 300ft lbs of torque at 17 psi. Car trapped 113 at 19 psi. Absolutely the best street turbo to have, very very fast spool and lots of torque. $600
Custom A/c elbow for T25 based turbos on Edelbrock manifold or Greddy. This took a ton of time for my friend to make and there are very little people who have something like this. If you wanna go the T25 route and wanna make power and keep your A/c, this is the way to do it. $100 for the elbow. ID LIKE TO SELL THIS WITH THE TURBO AND DOWNPIPE IF POSSIBLE
The downpipe to go with this is built extra long to delete the cat placement and has a 3" y pipe cutout right before the front sway bar. Easy to reach for manual operation and perfect placement for electronic units. $75 with the elbow or $100 by itself.
SRE charge piping for LS and Treadstone TR8 intercooler good for 500whp. $250 Comes with all couplers and clamps
Authentic Greddy Type S BOV: $80
Buy all that for $1000
Summit Racing 3" electronic cutout: $100
Edelbrock T25 B series manifold: $100
Garrett ball bearing GT2560r Turbo, no shaft play, always clean, restricted oil and water cooled, ~10,000 miles. Will come with water cooling fittings and oil inlet and oulet fittings with restrictor as well as the ATP 2" charge pipe adapter. Stock LS made 283whp and almost 300ft lbs of torque at 17 psi. Car trapped 113 at 19 psi. Absolutely the best street turbo to have, very very fast spool and lots of torque. $600
Custom A/c elbow for T25 based turbos on Edelbrock manifold or Greddy. This took a ton of time for my friend to make and there are very little people who have something like this. If you wanna go the T25 route and wanna make power and keep your A/c, this is the way to do it. $100 for the elbow. ID LIKE TO SELL THIS WITH THE TURBO AND DOWNPIPE IF POSSIBLE
The downpipe to go with this is built extra long to delete the cat placement and has a 3" y pipe cutout right before the front sway bar. Easy to reach for manual operation and perfect placement for electronic units. $75 with the elbow or $100 by itself.
SRE charge piping for LS and Treadstone TR8 intercooler good for 500whp. $250 Comes with all couplers and clamps
Authentic Greddy Type S BOV: $80
Buy all that for $1000
Summit Racing 3" electronic cutout: $100
Last edited by LightningTeg; Aug 31, 2010 at 07:48 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stopsign32v
Forced Induction
18
Feb 10, 2015 02:47 PM
