Hi
Can someone please explain / ( or direct me to a resource) how i can find out what my head is on my mini-me?????
the stamp says PM3-8 on the head (The valve cover reads 16 valves???) I was told by the guy i got it from that it was off a 91 SI ( it may be a crx or prelude)

Here are 2 forum pages I found that are helpful but didn’t answer it for me 100%

https://honda-tech.com/forums/tech-misc-15/d-series-head-codes-786093/
http://www.sohchonda.com/forums/index.php?showtopic=13

ALSO

knowing what the head is leads me into a few questions

I have an 88 crx dx the block is a d15b2, i got it that way and will be happy if it is? It runs, but not well .

My Questions
what timing belt is the correct one for this swap?
how can i find out that information?

can I tell what I really have?
ie what is the pm3-8 head?
is it from an SI?
It it a vtec head?
If it is a mini –me what timing belt is the right one? D1.5, d1.6 or z6, or other?????
I do have an adjustable cam gear on it, I was told to advance it 4.75 degrees, is that right?
does the adj cam gear make up for the wrong belt?

if not then what?


I feel like I have been chasing my tail, all I want is to be able to tune it well enough to drive it every day. not looking to build a racer.

Is there anything else I need to know.

Are there any other resources that would help?

Please can you add some insight for me?
God Bless
Brian