Installing alarm. I don't need this relay if my car already has power locks, correct?

If not, then do I just tie the green and blue wire from my clifford 50.5x brain straight to the lock/unlock wires (respectively) coming off the driver door locking switch before the power lock control module?

 

No, you do not need the relay pack.

Yes, the green and blue are connected to the lock/unlock leads from the switch, before the PDLCM. 94

 

thanks fcm

 

I have it wired this way now and it blew the fuse under the hood so I replaced that then I noticed when using the switch, the PDLCM clicks but its not moving the actuators now. After that I went ahead and swapped the blue/green wires from the alarm brain thinking I had the polarities backwards and hit lock on the remote and that blew the fuse again. Thrird fuse now and the PDLCM still clicks but no actuator movement.

Whats going on with my locks?

Is it possible to fry a PDLCM like this?

 

MM&Y of car please? 94

 

Civic ex coupe '96.

When I bought it, it was missing radio, security, and PDLCM. Prev owner must have had their own alarm in it and uninstalled it before selling. So I picked up a PDLCM for junk yard and so I had power locks with the switch and when I used the key to unlock. I'm thinking its fried so I'm gonna pick up another PDLCM today, $10.

 

HAHA I figured out whats goin on! I was playin with too many wires last night and ended up tying my auto window module to the lock/actuator leads and was sending a plug through or something. Unpluged them, PDLCM works just fine, hooked up the alarm, and the locks work now with the alarm.

Now I gotta figure out the window stuff then start troubleshooting my remote start and neutral safety module.

 

Whats wrong with the windows? 94

 

I just had to wire them up. Windows wired now. I think I need to program the unit some how.