FS: Bseries turbo kit COMPLETE BOLT ON AND GO!!
Thread Starter
Honda-Tech Member
Joined: Sep 2007
Posts: 525
Likes: 0
From: Lafayette, Indiana, U.S.
Kit includes:
eBay T3/T4 turbo (no leaks, very minimal shaft play)
Emusa wastegate w/ 11psi spring and dumptube
2.5" aluminum piping w/ ply couplers and t-bolt clamps
Medium size intercooler
Cast manifold
2.5" downpipe
Rfl style bov
Prosport clear face boost gauge
Dsm 450 blue top injectors
Honda resistor box
Chipped ecu with LS 13psi tune on Crome
Turbonetics boost controller
All oil lines
Also have Compition 6puck sprung clutch (grabs hard), walboro 255 fuel pump, ek dual gauge pod cluster surround.
These can be included for extra.
Setup is on a ls motor. Got 27mpg to and from import alliance. Recommend running 2 degree colder Ngk plugs, 92-93 octane gas, and a wideband.
Setup should work in any civic/integra chassis with possible modification of piping. Will work with d series motors but will need different manifold and tune.
Asking $900obo for kit, if interested in the few extra parts we can work out a deal. Will not part out kit!! Local pickup only. Feel free to text 7653372558
eBay T3/T4 turbo (no leaks, very minimal shaft play)
Emusa wastegate w/ 11psi spring and dumptube
2.5" aluminum piping w/ ply couplers and t-bolt clamps
Medium size intercooler
Cast manifold
2.5" downpipe
Rfl style bov
Prosport clear face boost gauge
Dsm 450 blue top injectors
Honda resistor box
Chipped ecu with LS 13psi tune on Crome
Turbonetics boost controller
All oil lines
Also have Compition 6puck sprung clutch (grabs hard), walboro 255 fuel pump, ek dual gauge pod cluster surround.
These can be included for extra.
Setup is on a ls motor. Got 27mpg to and from import alliance. Recommend running 2 degree colder Ngk plugs, 92-93 octane gas, and a wideband.
Setup should work in any civic/integra chassis with possible modification of piping. Will work with d series motors but will need different manifold and tune.
Asking $900obo for kit, if interested in the few extra parts we can work out a deal. Will not part out kit!! Local pickup only. Feel free to text 7653372558
Last edited by DuecedSol; Aug 4, 2010 at 04:35 PM.
Thread Starter
Honda-Tech Member
Joined: Sep 2007
Posts: 525
Likes: 0
From: Lafayette, Indiana, U.S.
Literally, tap your oil pan, bolt the kit on, wire the resistor box, plug the ecu in and go!! Low 13, High 12 sec street car over night. Be ready for no traction 1st through 2nd!!


