So I'm hooking up a keyless entry in my 4dr integra. I have hooked up everything else already (lock, unlock, etc...) I'm having trouble finding where the parking light is. I went on Causeforalarm v7 and it says the parking light is a red/black wire and then there's another one where they said on the fuse panel theres the 4th plug. On the main connector I know the parking light is the White wire so I don't know where to plug it. I put it in the 4th plug on the fuse panel but the lights don't flash.

It is a Viper 5301

Thank you.

 

ttt

 

ttt

 

Parking light "free pin", [4th plug????] on fuse box, sounds like you have the wrong free pin, test them, the one that goes to 12V+ when you turn on the park/head lights is the correct one, you will also find a 12V constant free pin, [hot at all times] and a 2nd ign. free pin, [hot in run only]

What year is your Integra? 94

 

It's a 97 4dr ls sedan. So on the connector of the Viper 5301 I know the white wire is the parking light. I just need to know where to put that wire to make the lights flash when I lock or unlock. Is there any other wire on the module that would need to be connected to something else?

 

There is no other wire that needs connecting.

Make sure the park light polarity jumper is in the correct location, [pos. (+) output].

Make sure you have the correct free pin on the fuse box. 94

 

Ok. I will look over the module to see if there's a polarity jumper and try some different fuse box positions. Thanks

 

I tried all the slots on the fuse panels under the dash. None of it worked. I changed a jumper and still no luck. Is there suppose to be a inline fuse?

 

Do you not have a meter or test light? 94

 

I have a test light. I should hook up the test light to that white wire and try to see if it lights up correct?

 

first test the free pins to make sure you have the correct one, if you do, then test the output from the alarm. 94