Sites Racing Splitter and Undertray for 98-01 Integras.
Thread Starter
Trial User
Joined: Jan 2000
Posts: 403
Likes: 0
From: San Diego, CA
Sites Racing Splitter and Undertray for 98-01 Integras.
Racing Splitter and Undertray for the 98-01 Integra.
Finally, after months of R&D and procrastination, I am ready to begin selling the Sites Racing Splitter and Undertray. The total cost for both the lip and undertray is $415 USD. If you wish to purchase them separately, the lip is $300 and the undertray is $100 – if purchased separately, they will NOT come assembled. Either way, there is NO mounting kit included (for an example of mounting, see below). Shipping is extra.
Specs
-------
The splitter and undertray were designed with racing and lapping-days in mind. Those of you whom participate in road racing and/or lapping events know what can happen during an “off-track” excursion. That said, the pieces were designed to be incredibly strong, yet inexpensive enough to replace if an incident occurred. The lip itself is constructed of fiberglass and is incredibly strong, while the undertray is made of ¼” ABS, which is flex-able yet firm enough to withstand pressures exerted at high-speed.
Here is a link to a thread posted by Glen Kawano, our sponsored driver with his impression of the Splitter and Undertray during a TCRA race at Willow Springs.
https://honda-tech.com/zerothread?id=267404
Below are some pictures of the pieces mounted with 8 Dzus fasteners, allowing for an installation and removal time of about 45 seconds.
Ordering
-----------
All Sites Racing Splitters are made to order, with an approximate turnaround time of 2-3 weeks once money is received. This time may fluctuate depending on the volume of orders at the time. And remember, the Sites Racing Splitters are intended for OFF ROAD USE ONLY.
I accept Visa, Mastercard, check and money orders – personal checks will take at least 5 buisiness days to clear before the order is processed.
If you are interested in a purchase or have questions about shipping costs, please contact me at asites1@san.rr.com – expect a response time of no more than 24 hours.
If you have questions about the brake ducts, please contact Mark Johnson at imhuge@juno.com
Thanks,
Andy
Finally, after months of R&D and procrastination, I am ready to begin selling the Sites Racing Splitter and Undertray. The total cost for both the lip and undertray is $415 USD. If you wish to purchase them separately, the lip is $300 and the undertray is $100 – if purchased separately, they will NOT come assembled. Either way, there is NO mounting kit included (for an example of mounting, see below). Shipping is extra.
Specs
-------
The splitter and undertray were designed with racing and lapping-days in mind. Those of you whom participate in road racing and/or lapping events know what can happen during an “off-track” excursion. That said, the pieces were designed to be incredibly strong, yet inexpensive enough to replace if an incident occurred. The lip itself is constructed of fiberglass and is incredibly strong, while the undertray is made of ¼” ABS, which is flex-able yet firm enough to withstand pressures exerted at high-speed.
Here is a link to a thread posted by Glen Kawano, our sponsored driver with his impression of the Splitter and Undertray during a TCRA race at Willow Springs.
https://honda-tech.com/zerothread?id=267404
Below are some pictures of the pieces mounted with 8 Dzus fasteners, allowing for an installation and removal time of about 45 seconds.
Ordering
-----------
All Sites Racing Splitters are made to order, with an approximate turnaround time of 2-3 weeks once money is received. This time may fluctuate depending on the volume of orders at the time. And remember, the Sites Racing Splitters are intended for OFF ROAD USE ONLY.
I accept Visa, Mastercard, check and money orders – personal checks will take at least 5 buisiness days to clear before the order is processed.
If you are interested in a purchase or have questions about shipping costs, please contact me at asites1@san.rr.com – expect a response time of no more than 24 hours.
If you have questions about the brake ducts, please contact Mark Johnson at imhuge@juno.com
Thanks,
Andy
Thread
Thread Starter
Forum
Replies
Last Post
darkDB1
Southern California (Sales)
2
Oct 23, 2011 06:24 AM
Andrew Sites
Acura Integra Type-R
52
Jan 20, 2003 05:25 PM
Andrew Sites
Road Racing / Autocross & Time Attack
7
Sep 18, 2002 08:22 AM
