Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good.

 

Hate wasting forum space with pictures - email if interested Jason@RageImports.com

SFWD ek - 10.oo's full car flat black b series ( 12k )
SFWD cobalt 9.60's full car red lsj series ( trades ?
SWFD ek - 10.50's full car bronze k series ( 15k )
Gold Rush 35 ft race trailer white ( 35k willing to talk )
HOT ROD ( haha ) CRX chassis far from done lots of parts

Email if you want any pictures

Thank you

 

I have a full set of spin werkes, pretty much brand new, only 3 passes on them. They do not come with tires. Fronts- 15x10 5.25 BS, 15x3.5 rears. Asking $800/ or I might do $400 front and $400 rear. Sorry for the crappy pics.

 

Prices are firm

Skunk2 Front control tower tie bar for an EG
Put on the car once and it doesnt clear my charge piping. $100 shipped


Fastbrakes rear 11" disk upgrade for an EG. Comes with Hawk pads
$360 shipped


Slotted rotors for a EG civic SI used for 6 months
$60 shipped


38mm $20 each BLUE IS SOLD RED 11psi

 

Contact Info
E-Mail – BigTeggie@gmail.com
PayPal - BigTeggie@gmail.com ADD 3% FEE to listed price if you choose PayPal

Please click on the thumbnails for larger images

All Motor K24 Short Block
- Assembled by Howard at RLZ
- K24A4 Block and Crank
- AEBS Sleeves
- IPS K24 Cunningham Rods
- RLZ Spec Wiseco Pistons (14.5:1 c/r & 89.5mm bore)
- ACL Race Bearings
- No accessories included
- All parts are brand new, zero miles (the block came out of a wrecked accord with less than 10k)
- I will not part out or disassemble, sorry
$3700 + Shipping


Quaife ATB
-Brand new, Installed into a transmission, however NO MILES
-Includes BRAND NEW bearings and speedo gear
$925 Shipped


Complete EG Bosch Fuel Pump Setup
-Everything is in great condition. Fuel pump and filter are new, less than 50 street miles on all the parts
-Bosch 044 Fuel Pump, Aeromotive 100 Micron Filter, fittings are a mix of Aeromotive, Earls and Summit
-Modified OEM fuel pickup and sock fits perfect in the OEM fuel tank
-Fuel pump mounts to the side of the fuel tank and the filter mounts under the car under the car
-Return line is only from the fuel pickup to the stock feed line, I tied in with a flared fitting, you can use your stock feed line or just run a longer return line and a union
-Feed from the pickup is 8an to the pump, 8an to the filter, and then 6an to the fuel rail, feed is long enough to make it to the fuel rail on a K-Series swapped car
-Includes enough power wiring to run to a relay mounted in the car, Great for an All-Motor Car
$475 Shipped


Hasport EG/DC K Mounts
-Great Condition
-Includes upgraded solid inserts, the extra rubber inserts, and all hardware.
$465 Shipped


Painless Master Disconnect
-Great Condition, like new
-Includes NHRA Approved shut off switch, and power wiring from the battery (located in front fender) to fuse box in stock location.
-Removes the need to run heavy gauge wiring from the front to back of car
-Everything is labeled and wiring has high quality crimp connections
$160 Shipped


K-Swap Starter and Alternator Wiring
-Great Condition
-Works with K swap where the battery is mounted in the front fender area
-Everything is labeled and wiring has high quality crimp connections
$25 Shipped


Injector Dynamics 725cc Injectors
-Brand new, includes adapters and plugs, great injectors
-Purchase brand new from T1 for $460+shipping
$445 Shipped



T1 Catch Can
- Great Condition, Brand New, Only installed on the car for mockup
-Designed for my K engine, 2 -16an on the top to the valvecover and -10an return
$215 Shipped


K20A Transmission Outer Cases
-Great Condition, One is from K20A2 and the other is a K20A3, both the same thing
$150 Shipped Each

 

Wheels: Sold
turbo: Sold

 

Set of tubes. They read 9.00-13-14. Bought them for my 25" slicks. Never used them. $60 shipped.

 

Crower Billet GSR rods-300 shipped
Full Race Pro am top mount b series- 770 shipped ****SOLD***
MSD DIS2+= 420 shipped

 

heres what i have left and i want it gone asap! so throw offers!


Brand new AEBS head studs- 100

Brand new Skunk2 pro series type-r/b16 manifold comes ready for a 4 fogger system- 230 I paid 265

(2) 5 lug rims with slicks 23x8.5x15 only 2 passes on them- 550


TAKE BEST OFFER FOR EVERYTHING!!!!!


PM or text 551-556-1069

 

sold

 

msd digital 7 =75314 NEW
GOING DIS NOW
BOGART WHEELS FRONT AND READ 750 WITH TIRES
LS CRANKS 100.
LS & B20 BLOCKS (BARE BLOCK 200.
NEW DIST. GSR AND LS 150
P28 150
WILWOOD BRAKE CALIPERS AND BRACKETS EG DC2 200.00
S200 200.00

 

18' closed deck trailer mint looks brand new used 5 times $1700 (no winch or box included)

aem ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $700

ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1700 or will trade the all motoort roller cams for a set of roller turbo cams or just sell cams seperate

2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux

2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux

2- 205 50 15 mickey thompson et drag radials basically brand new used for 1 day of photo shooting (not 1 burn out on them) 200 bux

 

Prices below include shipping to the lower 48. I will ship anywhere however extra shipping would apply. PM with any questions. Thanks!

AEM 10 Channel Injector Driver. 2 Available. AEM Part # 30-2710. One is used the other is brand new in the box.

NEW: $150 ***SOLD***

USED: $100 ***SOLD***

[/quote]

Autometer Ultra-Lite 5" 10K pedestal mount tach, USED. Autometer part number 3911 DOES NOT COME W/SHIFT LIGHT! TACH IS SETUP FOR A 4 CYLINDER ENGINE BUT STILL HAS THE 6&8 CYLINDER WIRES

Price: $100

 

b16 tranny with mfactory lsd no grinds trans is in awesome shape. Diff was used for approximately 50-75 street miles and there is 7 passes on it. 1100.00 obo.

Precision 35r. pte3582rlsp is the engraving. I have a 1.06 housing or a ceramic coated .82 housing. Has approximately 3500miles 900.00 obo

DSS 2.9 axles for hydro b series 7 passes perfect shape- 625.00 obo

will consider trades for subaru parts. PM me.

 

i got a few things up for sale out of my turbo set up

i have a 4202R turbo 74mm 128exhaust housing with 20 to 30 track passes and 15 dyno pulls.$1,800 OBO

4" down pipe with flex pipe weld on it and v-clamps .$140.00<<<<<-----SOLD

Ebay intercooler 4x32x12 with 3" aluminun charge pipe and everything has v-clamps welded on them this is for a 1992 civic. $300.00 <<<<<<<<<<--------SOLD

Z10 traction bar red $150.00 this fits 1992-1995 civic <<<<<<<<<<---------SOLD

version 1 AEM serial # 1040-0379 $800.00

4" magnaflow muffler $60.00

stock B-series axles $70.00

a set of GRP rods ls/B20 used for 4 dyno passes $400.00 OBO

all parts located in NJ

 

THIS CAR IS SUPER LIGHT!
CRX drag car, 1991 with three K motors, tranny and tons of parts.
(motors are stock, one is complete and running, two are disassembled & complete, missing one head) Motor and trans and clutch is in the car.
Fiberglass one piece front clip, doors, and rear hatch.
Almost all new and way too many to list. Car has NHRA certified 4130 chro-moly cage.
New paint, New Lexan, 2 brand new clutches including one high doller , Fresh Gear-Speed trans with zero miles on it with spool, New fuel cell, New Hasport mounts, New axles, more more more.
All welding and fab work done and painted. Fuel cell mounts, battery mount, interior tin work, everything fabbed and painted.
Not running, needs wiring and header and ECU.

http://s976.photobucket.com/albums/ae248/scottlucky/

$4300.00 >>>>>>>>>>>>>>>>>>>>NOW JUST $3500.00 <<<<<<<<<<
Call 714 342-6485
Located in Orange county, not far from Disneyland.

 

93 gsr head, port matched, slight port and polish, bronze valve guides, no valve train included. needs valve job (bent valves). $obo














99 gsr head, port matched, port and polish, no valve train included. needs valve job (bent valve). milled .030". $obo












skunk2 pro series gsr manifold port matched to 3"/76mm throttle body (bare). $200

 

I have a 97 LS head that has the following things done to it. Port & Polish, Ferrea Valves, Crower dual springs & retainers, painted gray valve cover. Selling the head for $350 and also have Brain Crower Stage 2 forced induction cams for a extra $200 o.b.o. if you need cams. Can pm, call or text with any more questions about the head and cams.

Bruce
727-430-1084

 

Franks Fiberglass Hot Rod style frontend fitted for EK (needs trimming)

 

Precision 1200cc injectors have 8 of them

just came back from precision flow tested and cleaned.

$250 for each set of 4 injectors plus shipping

or $500 for the 8 injectors including shipping anywhere in the US

Also have a Set of Mark Williams Axles for K series with Mark William intermediate shaft and Mark William Spool for $3500.00 plus shipping

thanks

Sergio

 

Selling some stuff I having laying around and some stuff for a friend, all items are in my posession. PM or text me 302-312-1533 Paypal accepted, shipping/fees at buyers expense.... I will work on getting all the pics posted asap.

Light Ported/Polished P72 GSR Head - Has all matching cam caps and rockers, NO VALVETRAIN, machined for .5mm Oversize Valves and has been milled .010..... I have a ton of stock valverain I can include and a set of B16 cams/cam gears as well $300 Valvecover included

Ferrea Dual Valve Springs #S10035, Spring Seat Locators and matching Titanium Retainers - Used for only some dyno time a few passes down the track, 65lb Seat Pressure and just had them tested when I had them removed they are still @ 65lb.... Paid $675 for the set $500 firm - Best Valvetrain money can buy!

Full-Race PWR Intercooler - Core size is 24x10.5x3.25, has some damage to the fins. $350 obo

Mishimoto Full Size Rad for DC - Used but in great condition, comes with one fan... missing rad cap $150 obo

AEM Universal Adjustable Fuel Pressure Regulator - Used good condition $100

Skunk2 Weighted Shift **** - $40

Greddy 52mm Oil and Fuel Pressure Gauges - Barely used, black face with white numbers/dials. Includes everything needed $150
Greddy 52mm Boost Gauge - barely used, black face with white numbers/dials. I broke off the nipple on the sending unit removing it from the car, buy the above Oil and Fuel Press Gauges and I will include this free, just need to a buy new sending unit and its good.

Thermal R&D 3" Exhaust for a DC - I had a friend Tig a new flange on and he decided to shorten it 2", not an issue for someone making a custom DP, I have the piece he cut off with the original flange on it... otherwise its in good condition $300 obo

SW 8pt Cromoly Cage Kit - For a DC, never used includes 1/8 thick plates for the floor board and the added "X" option for the rear, I had the hoop make extra tall so it fits snugly to the headliner. I paid just under $500 $make offer$

 

Email/Pm me with any questions/offers/concerns.
Most parts have less than 40 runs on them.
I can get more pictures of anything so just ask.

• Motec m4 mil-spec/Raychem dr-25/deutsch connector harness.
Motec, M&W, Prologger, map sensor not for sale.



• 2 b-series halfshafts, both in good condition


• Lots of spare tranny internal parts


• 2 obd2 b-series alternators and 1 belt in good condition
• 2 sets of b-series alternator brackets


• 2 tial 44mm wg small red springs, 4.351 psi


• B-series starter


• 2 b-series bellhousings, needs spacers/washers to be used with stock slave cylinder


• 88-91 civic hatch tail lights and center piece


• 92-95 civic corner lights


• Eg/dc drivers side motor mount bracket post mount


• B-series rocker arms/pins/lost motion assemblies


• Lots of misc ek parts like cruise control , battery tray, clutch fork dust boot, master cylinder, coolant overflowcan, etc, etc

• Peakboost sfwd b16 twinscroll manifold, twin 44mm wg flanges, can include two dumptubes as well



• tps sensor oem


• Ericks racing 74mm throttle body with vband


• B-series dust shield, trimmed for moroso wet sump oil pan


• 99-00 civic si motor mount brackets


• Oem radiator hoses for 96-00 civic b-series, 200 miles on them


• Golden eagle fuel rail


• Civic Type R cluster


• Carbon fiber headlight scoop for ek

 

TEXT ME SERIOUS OFFERS ANYTIME

478-230-4013


ok guys i have here a never before used BRAND NEW neukin top mount manifold with a 44mm wastgate flange. this thing is beautiful!

these are sold for 850 on neukins site.


LOOKING TO GET $700 OBO obo obo obo text me offers 478-230-4013








I have paypal and i can ship overnight for FREE through my work place! =0

 

-Mickey Thomson 24.5/13/9 slicks have about 15 passes on them $220 shipped OBO


slick #1



slick#2




- -6an aeroquip fuel feed line with earls 40 micron filter and fitting to install from tank to fuel rail (line is 9feet long and was on crx, might fit others) $120 shipped obo

 

Spearco water to air intercooler With Extra End plate $150
[IMG][/IMG]