97 crv, i changed the plugs, didnt mix up the wiring i did it one at a time. Now the car wont start, just cranks and cranks. Checked for spark at the distributor and its not getting any that i can see. What can i check next?

 

Your distributor ! U awnsered your own question

 

Well i wasnt sure if there was another easy fix or a common problem like this.

 

BUMP!!! Is there any fuses that would keep it from getting spark??

 

have to agree with eghatch4sale, your problems gonna be in the distrib.

 

You didn't happen to replace the distributor rotor by chance? Sometimes that screw that holds it in place falls off and the rotor will fall off.

 

No i didnt, i pulled the cap off and it looked good, rotor was still on and everything. Looks like i need to put up a WTB for a dizzy, any other dizzy's compatable with the b20a4 one?

 

distributors dont break its the parts in them that do. save yourself the cash and fix it. everything in there can be tested and replaced.
your distrib is a series of magnets, coil, cap and rotor.

 

Had a y8 dizzy laying around so i swapped the ignitors and it fired right up.