0BD1 B18c1 swap 92 hatch knock sensor place and wiring
Thread Starter
Honda-Tech Member
Joined: May 2010
Posts: 207
Likes: 0
From: abilene tx
0BD1 B18c1 swap 92 hatch knock sensor place and wiring
I have a 92 civic hatch and im wanting to know where to put the knock sensor and how to wire it in
any help appreciated
thanks
any help appreciated
thanks
Honda-Tech Member
Joined: May 2010
Posts: 18
Likes: 0
From: county durham, UK
Re: 0BD1 B18c1 swap 92 hatch knock sensor place and wiring
it goes on the back of the engine block mate,
http://www.ff-squad.com/tech/sensors/ks.jpg
and as for the wiring the knock sensor feed goes to pin D3 on the ecu and the other just goes to a common ground. stuart
http://www.ff-squad.com/tech/sensors/ks.jpg
and as for the wiring the knock sensor feed goes to pin D3 on the ecu and the other just goes to a common ground. stuart
Thread Starter
Honda-Tech Member
Joined: May 2010
Posts: 207
Likes: 0
From: abilene tx
Re: 0BD1 B18c1 swap 92 hatch knock sensor place and wiring
it goes on the back of the engine block mate,
http://www.ff-squad.com/tech/sensors/ks.jpg
and as for the wiring the knock sensor feed goes to pin D3 on the ecu and the other just goes to a common ground. stuart
http://www.ff-squad.com/tech/sensors/ks.jpg
and as for the wiring the knock sensor feed goes to pin D3 on the ecu and the other just goes to a common ground. stuart
Thread
Thread Starter
Forum
Replies
Last Post
