FS: Titanium 2 1/2 Exhaust, Built K20 short block, Koni
Interested In trading for B series part's:
Edlebrock Performer X I.M.
Good After market Valve train
GOOD cams
GSR/ITR, LSD with the comlete final drive for it, or
B16/LS, LSD but wouldn't need the final drive unless its the B16 4.4
92mm or 95mm stroker kit: All I want is crank and rods
Full 2 1/2 Titanium cat-back exhaust. will work on eg/dc/ek coupes and 4 doors.
the complete exhaust with stinless test pipe weighs 18 pounds
$600 obo +S&H **PENDING**
Shortblock: $1600 obo + S&H
Built K20 short block
This setup was ran for a max of 2000 miles consisting of dyno pulls, about 30 1/4 passes, 1 road course event and 1 round trip drive from chicago to indianapolis. This block has revved to 9000rpm and can take a lot more than that. Buyer will receive a spec sheet along with the block.
Block: k20a3
Pistons: Toda 86.5mm 12.3:1 CR
Rods: Crower Maxi light
Crank: k20a2 balanced and micropolished by ERL
Main studs: ARP
Machining and assembly: ERL
Can text pics of everything else
Call or Text: six three zero eight nine zero one seven nine five
Brandon
Edlebrock Performer X I.M.
Good After market Valve train
GOOD cams
GSR/ITR, LSD with the comlete final drive for it, or
B16/LS, LSD but wouldn't need the final drive unless its the B16 4.4
92mm or 95mm stroker kit: All I want is crank and rods
Full 2 1/2 Titanium cat-back exhaust. will work on eg/dc/ek coupes and 4 doors.
the complete exhaust with stinless test pipe weighs 18 pounds
$600 obo +S&H **PENDING**
Shortblock: $1600 obo + S&H
Built K20 short block
This setup was ran for a max of 2000 miles consisting of dyno pulls, about 30 1/4 passes, 1 road course event and 1 round trip drive from chicago to indianapolis. This block has revved to 9000rpm and can take a lot more than that. Buyer will receive a spec sheet along with the block.
Block: k20a3
Pistons: Toda 86.5mm 12.3:1 CR
Rods: Crower Maxi light
Crank: k20a2 balanced and micropolished by ERL
Main studs: ARP
Machining and assembly: ERL
Can text pics of everything else
Call or Text: six three zero eight nine zero one seven nine five
Brandon
Last edited by typeR_s; May 15, 2010 at 02:08 PM.
As for everything else If I don't have it somewhere in the shop I can get it for you. But I could throw in a pan and pulley.



hahah Nice parts dude