EF parts: Roll Bar, Trans, header
Thread Starter
Honda-Tech Member
Joined: Jul 2006
Posts: 443
Likes: 0
From: Chicago Area, IL
EF parts: Roll Bar, Trans, header
i can send pics on request just give me your email. they're all on my blackberry
Cable J1 trans. good condition, no grinds, no pop outs. i may have brand new oem axle seals in honda bags somewhere for this too. case is clean enough to eat off of
$250
Autopower Race Roll bar. pretty much sums it up, painted gunmetal. has permanent cross bar and harness bar. i bought this from TallKyle a few years back
$350
Tri-Y 4-2-1 header. i bought this quite a few years back. before your grandma was sellin the knockoff hytech. i was told this is an authentic Hytech Productions header, which means its an off the shelf bolt on unit, and doesnt have any hytech stampings. Does have some road rash because the header hangs rather low. still made a lot of power on my B16 even with it like that
$200
Password:JDM rear strut tower brace, 9/10 only cuz its been installed/used
$100
Crx Si front hubs/knuckles/brakes complete. came off my parts car, all i got on that
$80
Crx Si Rear disc, complete, came of same car, gotta check the condition of the parking cables, may have had to cut one, dont remember 100% and this ***** in my storage
SOLD - to Mrcrx28
Red Crx Si rear hatch with brand new(ish) lift supports. the lift supports alone new are $60 +tax
$50
no trades unless its Kseries stuff. i need these things gone
Also throwin this out here just to see what offers i get
FastBrakes 11.5" Wilwood 4pt front Big Brake kit. fits any civic with factory 9.2" front brakes, you will need 15's to clear these. comes with stainless steel braided brake lines. all parts are BRAND NEW. Hawk HP pads for street driving and Hawk DTC30 race compound track pads.
FastBrakes 10.5" Wilwood 2pt rear Big Brake kit. this is their drum to big brake disc conversion. it would be my assumption that these'll fit anything with a drum rear brake, but i would advise you to confirm this on your own. comes with all appropriate bolts/brackets, stainless steel braided brake lines, 2 calipers and Hawk HP pads for the rears. All parts are BRAND NEW. with this kit you will not have a parking brake
both kits have BRAND NEW rotors.
i paid $1600 for this kit i'm willing to sell it for $1200. i will trade the complete setup for SPOON calipers to fit ITR 4x114.3, if interested in this please PM me and we'll talk
all parts came off a 1991 Civic Dx
Cable J1 trans. good condition, no grinds, no pop outs. i may have brand new oem axle seals in honda bags somewhere for this too. case is clean enough to eat off of
$250
Autopower Race Roll bar. pretty much sums it up, painted gunmetal. has permanent cross bar and harness bar. i bought this from TallKyle a few years back
$350
Tri-Y 4-2-1 header. i bought this quite a few years back. before your grandma was sellin the knockoff hytech. i was told this is an authentic Hytech Productions header, which means its an off the shelf bolt on unit, and doesnt have any hytech stampings. Does have some road rash because the header hangs rather low. still made a lot of power on my B16 even with it like that
$200
Password:JDM rear strut tower brace, 9/10 only cuz its been installed/used
$100
Crx Si front hubs/knuckles/brakes complete. came off my parts car, all i got on that
$80
Crx Si Rear disc, complete, came of same car, gotta check the condition of the parking cables, may have had to cut one, dont remember 100% and this ***** in my storage
SOLD - to Mrcrx28
Red Crx Si rear hatch with brand new(ish) lift supports. the lift supports alone new are $60 +tax
$50
no trades unless its Kseries stuff. i need these things gone
Also throwin this out here just to see what offers i get
FastBrakes 11.5" Wilwood 4pt front Big Brake kit. fits any civic with factory 9.2" front brakes, you will need 15's to clear these. comes with stainless steel braided brake lines. all parts are BRAND NEW. Hawk HP pads for street driving and Hawk DTC30 race compound track pads.
FastBrakes 10.5" Wilwood 2pt rear Big Brake kit. this is their drum to big brake disc conversion. it would be my assumption that these'll fit anything with a drum rear brake, but i would advise you to confirm this on your own. comes with all appropriate bolts/brackets, stainless steel braided brake lines, 2 calipers and Hawk HP pads for the rears. All parts are BRAND NEW. with this kit you will not have a parking brake
both kits have BRAND NEW rotors.
i paid $1600 for this kit i'm willing to sell it for $1200. i will trade the complete setup for SPOON calipers to fit ITR 4x114.3, if interested in this please PM me and we'll talk
all parts came off a 1991 Civic Dx
Last edited by neofreak; Apr 27, 2010 at 09:35 AM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2006
Posts: 443
Likes: 0
From: Chicago Area, IL
Thread Starter
Honda-Tech Member
Joined: Jul 2006
Posts: 443
Likes: 0
From: Chicago Area, IL
