GT3076R/GT3082R T31 4-bolt .63A/R Turbine HSG Ceramic Coated Ported
Thread Starter
Joined: Jan 2002
Posts: 24,555
Likes: 241
From: City of Wind, IL, USA
GT3076R/GT3082R T31 4-bolt .63A/R Turbine HSG Ceramic Coated Ported
SOLD AS OF 8.15.2010
thank you for looking into my thread. As always I am changing components in order to work with other prototype turbochargers.
Enclosed are pictures of my GT3076R/GT3082R Turbine Housing .63A/R T31 4 bolt 2.5 inch discharge.
this turbine housing will only fit the GT3076R turbine wheel. It will not fit a T-series turbine wheel at all. Please do not make the mistake that it will fit a stage III or GT3582R turbocharger
the housing has been gasket-matched and ported for maximum efficiency. as a bonus, it has been freshly ceramic coated, and includes bolts and hardware brackets. this housing has been used for approximately 2000 miles. the turbine housing has no cracks of any kind
New brackets and hardware are included. There are no seized bolts of any kind
ported gasket matched.
this is what a typical T-3 inlet looks like when it is not ported.
ported and gasket matched
I am asking for $320 or best offer shipped. I am open to reasonable offers, as the porting alone is worth over $100. NO TRADES, PLEASE
PayPal preferred. We can discuss about fees. please PM me with questions.
thank you for looking into my thread. As always I am changing components in order to work with other prototype turbochargers.
Enclosed are pictures of my GT3076R/GT3082R Turbine Housing .63A/R T31 4 bolt 2.5 inch discharge.
this turbine housing will only fit the GT3076R turbine wheel. It will not fit a T-series turbine wheel at all. Please do not make the mistake that it will fit a stage III or GT3582R turbocharger
the housing has been gasket-matched and ported for maximum efficiency. as a bonus, it has been freshly ceramic coated, and includes bolts and hardware brackets. this housing has been used for approximately 2000 miles. the turbine housing has no cracks of any kind
New brackets and hardware are included. There are no seized bolts of any kind
ported gasket matched.
this is what a typical T-3 inlet looks like when it is not ported.
ported and gasket matched
I am asking for $320 or best offer shipped. I am open to reasonable offers, as the porting alone is worth over $100. NO TRADES, PLEASE
PayPal preferred. We can discuss about fees. please PM me with questions.
Last edited by TheShodan; Nov 11, 2010 at 12:09 PM.
Thread Starter
Joined: Jan 2002
Posts: 24,555
Likes: 241
From: City of Wind, IL, USA
Re: GT3076R/GT3082R T31 4-bolt .63A/R Turbine HSG Ceramic Coated Ported
Good housing for those that want a bargain as they find a new or used GT3076R or GT3082R
Trending Topics
Thread Starter
Joined: Jan 2002
Posts: 24,555
Likes: 241
From: City of Wind, IL, USA
Re: GT3076R/GT3082R T31 4-bolt .63A/R Turbine HSG Ceramic Coated Ported
Thread Starter
Joined: Jan 2002
Posts: 24,555
Likes: 241
From: City of Wind, IL, USA
Re: GT3076R/GT3082R T31 4-bolt .63A/R Turbine HSG Ceramic Coated Ported
This can work on used GT3076R and GT3040R/GT3082R
Last edited by TheShodan; Jun 3, 2010 at 07:04 AM.
Thread Starter
Joined: Jan 2002
Posts: 24,555
Likes: 241
From: City of Wind, IL, USA
Re: GT3076R/GT3082R T31 4-bolt .63A/R Turbine HSG Ceramic Coated Ported
thank you for looking into my thread. As always I am changing components in order to work with other prototype turbochargers.
Enclosed are pictures of my GT3076R/GT3082R Turbine Housing .63A/R T31 4 bolt 2.5 inch discharge.
this turbine housing will only fit the GT3076R turbine wheel. It will not fit a T-series turbine wheel at all. Please do not making the mistake that it will fit a stage III or GT3582R turbocharger
the housing has been gasket-matched and ported for maximum efficiency. as a bonus, it has been freshly ceramic coated, and includes bolts and hardware brackets. this housing has been used for approximately 2000 miles. the turbine housing has no cracks of any kind
New brackets and hardware are included. There are no seized bolts of any kind
ported gasket matched.
this is what a typical T-3 inlet looks like when it is not ported.
ported and gasket matched
I am asking for $320 or best offer shipped. I am open to reasonable offers, as the porting alone is worth over $100. NO TRADES, PLEASE
PayPal preferred. We can discuss about fees. please PM me with questions.
Enclosed are pictures of my GT3076R/GT3082R Turbine Housing .63A/R T31 4 bolt 2.5 inch discharge.
this turbine housing will only fit the GT3076R turbine wheel. It will not fit a T-series turbine wheel at all. Please do not making the mistake that it will fit a stage III or GT3582R turbocharger
the housing has been gasket-matched and ported for maximum efficiency. as a bonus, it has been freshly ceramic coated, and includes bolts and hardware brackets. this housing has been used for approximately 2000 miles. the turbine housing has no cracks of any kind
New brackets and hardware are included. There are no seized bolts of any kind
ported gasket matched.
this is what a typical T-3 inlet looks like when it is not ported.
ported and gasket matched
I am asking for $320 or best offer shipped. I am open to reasonable offers, as the porting alone is worth over $100. NO TRADES, PLEASE
PayPal preferred. We can discuss about fees. please PM me with questions.
Thread
Thread Starter
Forum
Replies
Last Post
the_0ne
Classifieds: Forced Induction
32
Jun 15, 2009 02:25 PM
doc
Forced Induction
0
Jan 13, 2006 04:32 PM
stizzit
Forced Induction
22
Sep 2, 2004 08:15 PM
