k my gt35r cracked due to it touching the hood i tried to make a little dent,wouldn't work,so know im looking at the t3 gt40 blowzilla is that turbo a couple mm smaller then gt35r.can it fit my full race top mount,is it 4 bolt pattern.thanx

 

top

 

Don't they both have the same S cover on them, that would make them physically both the same size externally.

 

i guess i can make it fit ill dent the hood up like 2 inches who cares,but will it fit. 4-bolt pattern,they do have the same compressor housing so im guessing it'll fit.

 

The standard T3/Blowzilla uses a stage III exhaust wheel even though it is the same compressor wheel and compressor housing. The standard stage II exhaust wheel is NOT the same size as the one used in the GT35r despite the turbine housing area/radius ratio.

 

Shodan will the blowzilla fit on my top mount manifold.

 

somebody let me know i wanna order that turbo or the t3 t67.

 

Only YOU know if it will fit the topmount that you're using. As someone mentioned earlier, they use the same T04S diameter cover as the GT35R that you cracked. As long as you have solved that issue, I don't see why it wouldn't fit.

As for the T3 T67, that is made more for top end power (as is your top mount manifold), and easily can hit 600whp @ 23-25psi. You could use that as well. Let me know which one you prefer.