another white hatch. my newest and last project
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
this is gonna be the last car i do for a long long time so this thread will probally be quite long and extensive so just keep checking back. i sold off my last white eg, motor, 5 lug and everything to scoop this up as it sits. i needed a daily since my truck was on its last leg and needed more money than i cared to put into it. so i scooped this up off a friend for a good price as a starting point. it was basically the same thing i sold just in running condition and thats what i needed. that being said its got a lot of work going into it.
current mods:
gsr brakes front/rear, slotted rotors, goodrich stainless brake lines
volk te37's with falken zeix porject kiks lugnuts neo chrome
oem si front lip
amber fogs
spoon carbon mirrors
vision corners
smoked tails
tein hood dampners
apexi exhuast obx hi flow cat
momo seats
clarion in dash dvd player
skunk 2 short shifter with mugen ****
avid shift linkage
mishimoto rad/slim fan
b20b swap with itr gears in a gsr case machined to fit
exedy clutch
hytech replica big tube header
agx shocks and some no name coilovers
skunk 2 rear tie bar
skunk 2 rear strut bar
as of tomorrow im going to start putting on my new parts i had from my old project that i hung onto:
str pro series cam gears
mugen steering wheel/momo hub
mugen pedals
itr shift boot
carbon fiber airbag delete tray
jdm cluster
tucked harness made by rougeeg6 on here
odyssey battery
black dash/front carpet/ door panels/ plastics
future plans are a full coilover setup, function 7 lca's and beaks tie bar. spoon carbon duckbill, maricle x bar, takata harnes's. new champ white paint and boost. i'd like to have most of that done before some of the bigger shows of the summer but we will see how the funds pan out. here are a few pics how it sits now. ill have plenty more up tomorrow of the progress of the new parts





and my old mans mini project he is finally working on again. if i find a cheap b series its gonna get that but for now we are gonna get it on the road for the summer. if there is any interest in it i might make its own thread for it.
current mods:
gsr brakes front/rear, slotted rotors, goodrich stainless brake lines
volk te37's with falken zeix porject kiks lugnuts neo chrome
oem si front lip
amber fogs
spoon carbon mirrors
vision corners
smoked tails
tein hood dampners
apexi exhuast obx hi flow cat
momo seats
clarion in dash dvd player
skunk 2 short shifter with mugen ****
avid shift linkage
mishimoto rad/slim fan
b20b swap with itr gears in a gsr case machined to fit
exedy clutch
hytech replica big tube header
agx shocks and some no name coilovers
skunk 2 rear tie bar
skunk 2 rear strut bar
as of tomorrow im going to start putting on my new parts i had from my old project that i hung onto:
str pro series cam gears
mugen steering wheel/momo hub
mugen pedals
itr shift boot
carbon fiber airbag delete tray
jdm cluster
tucked harness made by rougeeg6 on here
odyssey battery
black dash/front carpet/ door panels/ plastics
future plans are a full coilover setup, function 7 lca's and beaks tie bar. spoon carbon duckbill, maricle x bar, takata harnes's. new champ white paint and boost. i'd like to have most of that done before some of the bigger shows of the summer but we will see how the funds pan out. here are a few pics how it sits now. ill have plenty more up tomorrow of the progress of the new parts





and my old mans mini project he is finally working on again. if i find a cheap b series its gonna get that but for now we are gonna get it on the road for the summer. if there is any interest in it i might make its own thread for it.
Last edited by xfrankx; May 14, 2010 at 12:35 PM.
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
some updates:
got the black interior and new stuff installed over the weekend. next step is to sand/strip the back and paint it.


found my leftovers from doing my old panels. i love this stuff its as close to oem as you can get as far as paint goes


i made a switch for my dvd player to go where my cigarette lighter was. since i dont use it and i dont like random switches on the dash or out in the open i figured this was a good place for it
i cut a little panel for it so it would sit flush in the little pocket
finished.
mugen wheel and sir cluster

ill have more pics up of the interior this week once its all painted and cleaned up. im gonna put my new harness and battery in too this weekend and clean up the bay some. thats it for now
got the black interior and new stuff installed over the weekend. next step is to sand/strip the back and paint it.


found my leftovers from doing my old panels. i love this stuff its as close to oem as you can get as far as paint goes

i made a switch for my dvd player to go where my cigarette lighter was. since i dont use it and i dont like random switches on the dash or out in the open i figured this was a good place for it
i cut a little panel for it so it would sit flush in the little pocket
finished.
mugen wheel and sir cluster
ill have more pics up of the interior this week once its all painted and cleaned up. im gonna put my new harness and battery in too this weekend and clean up the bay some. thats it for now
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
finally threw on my valve cover


interior is all in now. ill have some more pics soon i painted the back and did a few other things i just gotta upload them


interior is all in now. ill have some more pics soon i painted the back and did a few other things i just gotta upload them
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
i think i got in on here from someone for a hundred bucks or something like that. i got a good deal on the mugen wheel too used on ebay. just gotta keep an eye out and have cash when the deals come about
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
Hmmmm i need to do my interior all black wonder how that sem **** holds up, But there is a COMPLETE black interior at moms house but thats sketchy lol.
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,875
Likes: 0
From: home of the steel curtain, PA, USA
just switch it out thats what i did except for a few small things. i wouldnt do a dash and door panels in it but the rest is fine tom
Thread
Thread Starter
Forum
Replies
Last Post




_

