FS/FT:Poormans R with CTR pistons
Thread Starter
Honda-Tech Member
Joined: Dec 2005
Posts: 275
Likes: 0
From: arlington, tx, united state
FS/FT:Poormans R with CTR pistons
Specs:
Rebuilt 01 Gsr block
Ctr pistons
GoldenEagle Headstuds
Acl bearings
Stock bore and honed was honed to smooth it out
Stock 99 B16 head/ it got decked and cleaned
motor runs strong, smokes only in vtec was told its the valve seals not the rings...6k on rebuilt block. I want boost and this setup will be hard for me to acquire my goal. Motor is still in the car and running if you want to come check it out and see it for yourself. A deposit is required for me to take the motor out if you flake out i keep the deposit.
1400OBO
Rebuilt 01 Gsr block
Ctr pistons
GoldenEagle Headstuds
Acl bearings
Stock bore and honed was honed to smooth it out
Stock 99 B16 head/ it got decked and cleaned
motor runs strong, smokes only in vtec was told its the valve seals not the rings...6k on rebuilt block. I want boost and this setup will be hard for me to acquire my goal. Motor is still in the car and running if you want to come check it out and see it for yourself. A deposit is required for me to take the motor out if you flake out i keep the deposit.
1400OBO
Honda-Tech Member
Joined: Jul 2003
Posts: 3,448
Likes: 0
From: greenville, texas, usa
Re: FS/FT:Poormans R with CTR pistons
stock short 2000 si head new timing belt brand new dizzy recent tune up new gaskets the usual just lookin for somthin i havent had and have yet to roll a poor mans r
Thread
Thread Starter
Forum
Replies
Last Post
Man_EK9
All Motor / Naturally Aspirated
1
Feb 10, 2008 11:52 AM
