Alright guys and gals, i just got everything in and hooked up, I rebuilt the motor for the guy and installed the motor.

Everything went great, but now the some dash lights are on and flashing with no key in the ignition (Brake, Seatbelt, and Door lights) I'm going to assume this isnt normal.

Also when i put the key in and turn it to the on position it pops the ECU fuse (15 amp)

As far as i know i have hooked up everything from the OBD0-OBD1 conversion harness, although i do have a few extra wires (knock, iab, scs) please help!

Thanks in advance

 

anybody have any suggestions

 

sounds like a wire is grounding out at the ecu. i had a similar problem check all wiring

 

sounds like you have a live wire exposed. follow the wires and look for an open splice or if its catching ground.