ObdII for Smog
Evaporative System and Oxygen Sensor not ready.
Can't pass Smog.
I disconnected the battery since the CEL was on but
I've been driving it for a few 100 miles but still
has these problems.
Any help will be appreciated.
Can't pass Smog.
I disconnected the battery since the CEL was on but
I've been driving it for a few 100 miles but still
has these problems.
Any help will be appreciated.
1. let the car sit over night or until the temp gauge reads Cold
2. drive it on the freeway for at least 12miles with speeds of about 55-60 and NO abrupt acceleration
3. let the car COOL down over night or until the temp gauge reads COLD again and do step #2 again.. that SHOULD set the evap and 02 sensor. if not then your cell should come on for a problem
2. drive it on the freeway for at least 12miles with speeds of about 55-60 and NO abrupt acceleration
3. let the car COOL down over night or until the temp gauge reads COLD again and do step #2 again.. that SHOULD set the evap and 02 sensor. if not then your cell should come on for a problem
1. let the car sit over night or until the temp gauge reads Cold
2. drive it on the freeway for at least 12miles with speeds of about 55-60 and NO abrupt acceleration
3. let the car COOL down over night or until the temp gauge reads COLD again and do step #2 again.. that SHOULD set the evap and 02 sensor. if not then your cell should come on for a problem
2. drive it on the freeway for at least 12miles with speeds of about 55-60 and NO abrupt acceleration
3. let the car COOL down over night or until the temp gauge reads COLD again and do step #2 again.. that SHOULD set the evap and 02 sensor. if not then your cell should come on for a problem
I've been already driving the car for about 300 miles both highway and city driving.
Thread
Thread Starter
Forum
Replies
Last Post
mikep_95133
Honda Accord (1990 - 2002)
14
Jan 11, 2012 10:00 PM




