FS/FT: RSX Type-S tranny, B series MSD Pro billet, MSD Digital 6, DSS axles, and more
2002 RSX Type-S 6 speed transmission $750 - will meet within 2 hours driving time, no shipping




ATS pressure plate - K series? - $100 -This came as extra parts with the swap but it doesn't seem to be a B series pressure plate comparing to the one on my B20 block. Probably needs to be resurfaced.


Stock GSR intake manifold - $make offer - throttle body not included

Stock ITR intake manifold - $75 - as you can see in the pic somebody at one point dropped this and broke one of the corners of the flange off. Had a friend that can weld fix it. Also put up pics of a couple dings around the throttle body, but gasket should still seal fine.






Stock B17 cams - $make offer - scored where they rest in the journals in the head. Someone more knowledgeable than me may be able to fix them and use them.



Toda top and B17 bottom

Stock B20 pistons and rods - $make offer
If you want high resolution pictures instead of shrunk Photobucket ones, PM me with your e-mail address and what you want pictures of. All prices are OBO and I will ship unless otherwise stated. Paypal accepted.
Parts I am looking for:
B series transmission slave cylinder
84.5 mm high compression pistons
70 mm throttle body
OBD I B series VTEC distributor
OBD I B series VTEC engine harness
Black billet B series mounts for a EG
EG parts, just ask
Already sold:
MSD Pro Billet Distributor - $old on ebay
MSD Digital-6 Plus - $old on ebay
MSD Blaster HVC coil - $old on ebay
Buddy Club V-CON - $old via craigslist
DSS Driveshaft Shop Level 2.9 new style B series axles - $old to killerpenguin21
DSS Driveshaft Shop Level 2.9 old style B series axles - $old to dalepatters
Toda Spec C cams - traded with simboy2003
Thanks for looking!




ATS pressure plate - K series? - $100 -This came as extra parts with the swap but it doesn't seem to be a B series pressure plate comparing to the one on my B20 block. Probably needs to be resurfaced.


Stock GSR intake manifold - $make offer - throttle body not included

Stock ITR intake manifold - $75 - as you can see in the pic somebody at one point dropped this and broke one of the corners of the flange off. Had a friend that can weld fix it. Also put up pics of a couple dings around the throttle body, but gasket should still seal fine.






Stock B17 cams - $make offer - scored where they rest in the journals in the head. Someone more knowledgeable than me may be able to fix them and use them.



Toda top and B17 bottom

Stock B20 pistons and rods - $make offer
If you want high resolution pictures instead of shrunk Photobucket ones, PM me with your e-mail address and what you want pictures of. All prices are OBO and I will ship unless otherwise stated. Paypal accepted.
Parts I am looking for:
B series transmission slave cylinder
84.5 mm high compression pistons
70 mm throttle body
OBD I B series VTEC distributor
OBD I B series VTEC engine harness
Black billet B series mounts for a EG
EG parts, just ask
Already sold:
MSD Pro Billet Distributor - $old on ebay
MSD Digital-6 Plus - $old on ebay
MSD Blaster HVC coil - $old on ebay
Buddy Club V-CON - $old via craigslist
DSS Driveshaft Shop Level 2.9 new style B series axles - $old to killerpenguin21
DSS Driveshaft Shop Level 2.9 old style B series axles - $old to dalepatters
Toda Spec C cams - traded with simboy2003
Thanks for looking!
Last edited by prjct92eh2; Apr 22, 2010 at 03:13 PM. Reason: updated
hey do u have a part number for those wires? i have the same distributor but i need those wires. Or u can sell me yours
i'll look at them when i get home and see if there is one on them. Don't want to part out.
ttt for those that may be interested in the ignition parts that end in about an hour on ebay
Trending Topics
You got PM.
Thread
Thread Starter
Forum
Replies
Last Post
prjct92eh2
For Sale
18
Apr 24, 2010 03:37 AM
2006, axles, billet, coils, craigslist, digital, distributor, dss, greenville, msd, pro, problem, rsx, sc, series, transmission, type




