9.93@151 Daily Driven Street Car!!!
I made a few posts about this car already. i went low 10's with it a few times. only real change to the car was a new set of slicks
drove up to the track..swapped my tires out went 9.93@151 first pass.. got kicked out for no cage. swapped my tires back out and drove it back home. 60 miles each way
previous personal best was a 10.02@148 and 10.1@150. i know the car would have gone a .55-.60 next pass going by my 1/8, but oh well. i'll now be getting my race car back together to run true street
i'll post the vid a little later today. here are a few pics of the car/setup



85mm gsr
gsr crank
11.8 to 1 compression cp pistons
eagle rods
stock port gsr head
blox hsl cams
victorx intake manifold
blox 70mm throttle body
Rev valvetrain
62/62 T4 .68 journal bearing
ram horn manifold
single Tial mvs 38mm gate
intank walbro
inline walbro
1200cc rc injectors
Q16
hondata s300
29.5 psi
Thanks to the gay guy from TD Autowerkes for getting me tires at the last minute...
Victor from Avid for some awesome mounts, not too harsh for the street...but work great at the track..
Luis from Clutchmasters..5 years and the clutch is still kicking ***...
Last but not least Hondata for their awesome ecu. Car wouldnt be running the way it is if it werent for how great and easy it is to use
drove up to the track..swapped my tires out went 9.93@151 first pass.. got kicked out for no cage. swapped my tires back out and drove it back home. 60 miles each way
previous personal best was a 10.02@148 and 10.1@150. i know the car would have gone a .55-.60 next pass going by my 1/8, but oh well. i'll now be getting my race car back together to run true street
i'll post the vid a little later today. here are a few pics of the car/setup



85mm gsr
gsr crank
11.8 to 1 compression cp pistons
eagle rods
stock port gsr head
blox hsl cams
victorx intake manifold
blox 70mm throttle body
Rev valvetrain
62/62 T4 .68 journal bearing
ram horn manifold
single Tial mvs 38mm gate
intank walbro
inline walbro
1200cc rc injectors
Q16
hondata s300
29.5 psi
Thanks to the gay guy from TD Autowerkes for getting me tires at the last minute...
Victor from Avid for some awesome mounts, not too harsh for the street...but work great at the track..
Luis from Clutchmasters..5 years and the clutch is still kicking ***...
Last but not least Hondata for their awesome ecu. Car wouldnt be running the way it is if it werent for how great and easy it is to use
Awesome, simply awesome. Good to see someone trying to go faster and faster by tweaking other things besides the motor itself and making more power.
What were the previous tires and what are the new ones?
Also, is the ride height in the picture the one you race at?
What were the previous tires and what are the new ones?
Also, is the ride height in the picture the one you race at?
Trending Topics
Very effective k.i.s.s. set up! Interesting compression ratio as well, have you pretty much ditched the nitrous builds in favor of turbo set-ups now??
Off topic but do you have a shop in here FLA, I googled "The Horsepower Connection" and came up with a muscle car shop? Just curious because all of your set-ups have been very well though out and run really well.
Off topic but do you have a shop in here FLA, I googled "The Horsepower Connection" and came up with a muscle car shop? Just curious because all of your set-ups have been very well though out and run really well.
heres the vid.. dont mind my friends filming..lol
http://www.youtube.com/watch?v=Y3_oN...layer_embedded
stock axles, stock trans
yeah i have a shop in ft lauderdale, fl
http://www.youtube.com/watch?v=Y3_oN...layer_embedded
stock axles, stock trans
yeah i have a shop in ft lauderdale, fl



