Just need to hear from people who have done this.

http://preludeuk.forumup.com/viewtopic.php?t=14453

was searching around and i found that DIY. They did it on prelude rails and i was wondering if it will also work for integra seats as well?

I have my Tan S2K seats sitting there and I don't want to tear them apart and end up not working.

Thanks guys.

 

Nobody huh? Can i swap the integra seat pans and rails to the S2000 Seat.

 

yes you can, and a simple search would have answered your question instead of making a new post asking the same question for the 1 millionth time

 

I know I found this before with a search. Basically you use the Integra bottom pan with the springs removed.

 

I hate seeing people that say this crap all the time, if u get mad when u see it, then just skip the post instead of getting mad at it!!!!

 

yes its possible
http://www.team-integra.net/forum/di...6&ThreadPage=1

 

You don't even have to do everything that guy did with his Prelude seats.. Take your Integra seat out, and take the rails off the seat. Then, take the rails off the corresponding S2000 seat and swap them. Takes about 15 minutes..

 

Swapped the pans and everything. So now my S2000 Seats pull forward farther and recline all the way back. All 4 bolts line up. Lots of work, but its nice,safe,and comfortable.

 

i hate this post why dont you go and hold his hand

 

I used a 92-95 Civic seat pan. They're almost identical. I also heard that the S2000 seats bolt up perfectly to Mugen seat rails but I do not have the rails to confirm.