Kelford Stage 1 Cam Test K20A2
Thread Starter
Joined: Jan 2008
Posts: 1,720
Likes: 0
From: Plymouth, MN, USA
Kelford Stage 1 Cam Test K20A2
So we got a set of the new Kelford Stage 1 cams and put them on a back to back test against the stock K20A2 cams!
Stock K20A2
-Short ram w/ dirty filter
-4-2-1 Header
-N1 Catback
-91 octane fuel
-AEM Ems
-MAP Fuel regulator kit
-AEM FPR
-Hybrid Racing fuel rail
The Kelford 179-A Stage 1 cams can be used with stock valvetrain. Making these a very quick install.
They do REQUIRE tuning though.
Attached is the baseline with K20A2 cams and then the Kelford stage 1's with a quick tune.
Also a couple pictures we snapped during install.
I will be putting a cai w/ new filter on soon and testing some more!
Big thanks to Kelford, Hybrid Racing, and AEM for all of their support and quality products!
So that's a 9.5 Horsepower Gain and 6.5 ft lbs of torque increase!
Stock K20A2
-Short ram w/ dirty filter
-4-2-1 Header
-N1 Catback
-91 octane fuel
-AEM Ems
-MAP Fuel regulator kit
-AEM FPR
-Hybrid Racing fuel rail
The Kelford 179-A Stage 1 cams can be used with stock valvetrain. Making these a very quick install.
They do REQUIRE tuning though.
Attached is the baseline with K20A2 cams and then the Kelford stage 1's with a quick tune.
Also a couple pictures we snapped during install.
I will be putting a cai w/ new filter on soon and testing some more!
Big thanks to Kelford, Hybrid Racing, and AEM for all of their support and quality products!
So that's a 9.5 Horsepower Gain and 6.5 ft lbs of torque increase!
Thread Starter
Joined: Jan 2008
Posts: 1,720
Likes: 0
From: Plymouth, MN, USA
Re: Kelford Stage 1 Cam Test K20A2
Thread
Thread Starter
Forum
Replies
Last Post
soupE__
Mid-West (Sales)
1
May 3, 2010 09:03 PM
