b16 w/lsd vs. ITR
Hello all,
I am in the process of swapping transmissions in my car. I currently drive a GSR.
Now my question is; Besides the slightly different ratios between the b16 and ITR. Is there much of a difference?
The reason why I am asking this is, I have heard that the synchros on the B16's are weaker than their B18C counterparts. However this point was only stated towards cable transmissions. Would anyone know if it is still the same in the hydro transmissions?
Thanks in advance!!!!
I am in the process of swapping transmissions in my car. I currently drive a GSR.
Now my question is; Besides the slightly different ratios between the b16 and ITR. Is there much of a difference?
The reason why I am asking this is, I have heard that the synchros on the B16's are weaker than their B18C counterparts. However this point was only stated towards cable transmissions. Would anyone know if it is still the same in the hydro transmissions?
Thanks in advance!!!!
Honda-Tech Member

Joined: Jul 2004
Posts: 5,957
Likes: 0
From: nothing is real unless it is observed
WRONG...............
S4C=CTR/B16A2 has the same syncros as the GSR/ITR trans
Cable B16 trans are similar to all LS trans with the single syncro in 1/2
S4C=CTR/B16A2 has the same syncros as the GSR/ITR trans
Cable B16 trans are similar to all LS trans with the single syncro in 1/2
Thread
Thread Starter
Forum
Replies
Last Post




