i have a b16a2 to4e garrett and looking for around 20 psi on stock sleeves but curious do i need to change my map?

 

do you mean map sensor? yes, you will need a 2.5 Motorola or a gm 3 bar.

 

your sign says your at 18 psi....

 

well i am getting it tuned this spring it is street tuned currently and i have gathered that i can push it to between 18 and 20 lbs without sleeving the block

 

x2 or a 3 bar omni plug and play.

 

omni power 3 bar or 4 bar will work perfectly, plug & play.

http://www.phearable.net/shoppingcar...sors-c-29.html

 

ok sweet i am not sure what i have currently it is in storage i am pulling the the intake and head to make sure it is all good before tune i need to make sue i have crower double valve springs and retainers with the itr cams

 

how much boost for stock map sensor? does it screw up if u go past its limits

 

11psi stock map. it will not allow you to tune past that.

 

ic good info why the guy i bought it from was having trouble tuning it on chrome but i havent looke at it yet some much to learn and make sure is all good in the motor before i tune

 

3 or 4 bar will do fine...

 

i will have to put up some pics of it when i get it apart it is a pretty clean and sick looking civic