i recently purchased a h2b evolution kit for a EG chassis application from a friend for a decent price only problem is i have a EF chassis does any one know what do i need to get to make this work i am also using a cable actuated lsd b16 transmission, i am also concerned since i am doing a g23 swap would the driver side bracket that goes on the block be different on a F series block application? all help is appreciated thanx guys...

 

Hi not sure how to the kit works for different chassis. I'm also doing a g23 swap. I'm using the qsd kit though and drivers side engine mount adapter plate fit the f23a, but only 2 of the bolts were able to fit out of the 4 holes otherwise its fine.

 

you need the evolution ef mounts

might have to buy the whole h2b kit from evolution, not sure if they sell the mounts seperate.

 

thanx a friend of mines has an evolution kit and used hasport b series mounts and they fit fine

 

so only 2 out of the 4 holes bolt on? that doesnt sound to safe might have to get that adapter plate fabricated

 

i believe all you need is b series mounts for an ef or http://www.evoindusa.com/ and go to h2b adaptor kit and they have just mounts