FS: B16 longblock and T3/T67
Compressor Specifications:
-T04R 67mm compressor wheel with a max flow rate of 75 lb/min
-0.70AR T04S compressor housing
-Good to 650whp
Turbine Specifications:
-stage 5 turbine wheel
-0.63 or 0.82 A/R. turbine housing available
-4 bolt standard turbine discharge
CHRA Specifications:
-360 degree thrust bearing standard.
-Oil cooled&lubricated center section.
looking for the board and bindings, must be in good condition though. the turbo has seen maybe 5 dyno passes, is in basically new condition
-T04R 67mm compressor wheel with a max flow rate of 75 lb/min
-0.70AR T04S compressor housing
-Good to 650whp
Turbine Specifications:
-stage 5 turbine wheel
-0.63 or 0.82 A/R. turbine housing available
-4 bolt standard turbine discharge
CHRA Specifications:
-360 degree thrust bearing standard.
-Oil cooled&lubricated center section.
looking for the board and bindings, must be in good condition though. the turbo has seen maybe 5 dyno passes, is in basically new condition
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
AnclyT
Classifieds: Forced Induction
14
Jul 14, 2007 06:18 PM




