FS: SRR / PW:JDM / Mugen / Honda Access / Z-Speed / JDM / OEM
Thread Starter
HT White Ops
iTrader: (1)
Joined: Mar 2006
Posts: 16,222
Likes: 3
From: I see what you did there.
Cleaning out my spare bedroom, so some stuff has to go. All prices are OBO, but don't lowball me or I'll pee in your bubble tea.
Shipping + Paypal Fees NOT Included
====================
SRR Purple Pedal Set M/T
Stupid rare, including dead pedal. Even includes original packaging. Standard wear and tear, scrapes, fading, etc. Factory finish on these is notorious for wearing off. Comes with 3 of the 6 original screws, not that they're anything special. Hardware store will sell you more for $0.87. Dead pedal has no factory hardware. Probably could get these repowdercoated for $30-40 in any color you want.
SOLD






====================
Mugen 2nd Gen Front Strut Bar -- EG/EK/DC
Pretty mint condition, comes with Grade M8 bolts and nuts for install.
SOLD



====================
Honda Access EK4 Ferio Floor Mats
Great condition, all five pieces. For RHD car, but will easily fit LHD by sliding it under the kick panels and latches. Fits best in sedan, but will fit coupe/hatch as well.
$125



====================
Z-Speed Works B-Series Short Shifter
Own a piece of Honda history! This is from Z-Speed Works garage, way back in the day. Z-Speed became SKUNKWORKS, which split and became Skunk2 and Omnipower (which later split off and created BLOX). Pretty good condition considering the age. Only major marks are on the ball, where the nylon cage sits under the boot.
$75


====================
Password:JDM Cooling Plate for EK chassis.
Absolutely mint. Mounted twice for photos. Never driven with.
$60


BARS SOLD
Shipping + Paypal Fees NOT Included
====================
SRR Purple Pedal Set M/T
Stupid rare, including dead pedal. Even includes original packaging. Standard wear and tear, scrapes, fading, etc. Factory finish on these is notorious for wearing off. Comes with 3 of the 6 original screws, not that they're anything special. Hardware store will sell you more for $0.87. Dead pedal has no factory hardware. Probably could get these repowdercoated for $30-40 in any color you want.
SOLD






====================
Mugen 2nd Gen Front Strut Bar -- EG/EK/DC
Pretty mint condition, comes with Grade M8 bolts and nuts for install.
SOLD



====================
Honda Access EK4 Ferio Floor Mats
Great condition, all five pieces. For RHD car, but will easily fit LHD by sliding it under the kick panels and latches. Fits best in sedan, but will fit coupe/hatch as well.
$125



====================
Z-Speed Works B-Series Short Shifter
Own a piece of Honda history! This is from Z-Speed Works garage, way back in the day. Z-Speed became SKUNKWORKS, which split and became Skunk2 and Omnipower (which later split off and created BLOX). Pretty good condition considering the age. Only major marks are on the ball, where the nylon cage sits under the boot.
$75


====================
Password:JDM Cooling Plate for EK chassis.
Absolutely mint. Mounted twice for photos. Never driven with.
$60


BARS SOLD
Last edited by Eran; Jan 11, 2010 at 09:08 PM.
Thread Starter
HT White Ops
iTrader: (1)
Joined: Mar 2006
Posts: 16,222
Likes: 3
From: I see what you did there.
Thanks. Hmmm, may be interested in your CT-T bar. I've got an Icebox and a CT 4-2-1 going on my sol as soon as we do the motor swap.
war all of the time......
iTrader: (12)
Joined: May 2003
Posts: 12,564
Likes: 0
From: right over here, NC
wish i would've seen the pedals earlier.
i got those same mats and shifter for sale, thats funny. thats one of the few zspeed shifters i've seen.
bump for u
i got those same mats and shifter for sale, thats funny. thats one of the few zspeed shifters i've seen.
bump for u
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
DB8
Wheels
2
May 5, 2014 08:04 AM





