Alright guys I have been searching through all the different cam identity threads and getting so confused with all the pictures. Here is my deal. I have a 95 integra gsr with the stock cams that came with it. They look like this:


Now why do my 95 gsr cams look like these 96+ cams??
GSR 96+ spec intake CAM


Another Picture of my 1995 GSR cams


Now here is my other dilemma I have set of cams that came with my other DD 95 integra GSR (yes i have two 95 integra gsrs) The cams in this car were supposedly type r cams. I have ran a 14.8 with the car with just intake, IM, header and exhaust which leads me to believe that they may be indeed type r cams. BUT when i took them out today i noticed that they did not look anything like the pictures in this thread of type r cams. Here are some pictures of the unidentified cams:





Now I have compared these unidentified cams next to my gsr cams. Here you can clearly see the lobes on the intake cam on the bottom (gsr cam) is smaller than the lobes on the unidentified intake cam:



Please help me out HT Thanks!!

 

ttt

 

ttt

 

has anyone seen cams with these markings on it?

 

post in all motor

off the top of my head the triple groove is 96+ gsr and i thought the dual groove was ITR {like your UFO pictures}, there is a picture floating around somewhere to help ID them. see if you can find it. google itr cam pics or something

 

i searched and found this:
https://honda-tech.com/forums/acura-integra-type-r-8/how-identify-itr-camshafts-1220152/

But non of the pictures on that thread match my picture of my unidentified cams.