Fs: DTR/SSR B-series side exit race header,Sparco,MSD,Skunk2
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 2,182
Likes: 0
From: CITY BY THE BAY, ca, usa
Fs: DTR/SSR B-series side exit race header,Sparco,MSD,Skunk2
WILL TAKE ALL SERIOUS OFFERS
Omnipower drag full coilover suspension 18k/12k $700 plus shipping and pp fee
Anyone interested in a ssr/dtr side exit race header, Stainless light weight(Danny used his light weight flange),exits out the driver side,megaphone with reverse cone. Looking to trade for one that exits under the car i.e. RMF ,SMSP made for high comp 2.0 liter setups etc or sell for $900 obo... payed 1200 when I had it made. Made 268whp 175 tq on my 2.0l b series race motor
pictures of the header now
single scrape from getting on and off the trailer
the black spot by the o2 bung is plastic from my wideband and the discoloration by the tip is from my bumper rubbing on it
Alaniz square port race(eliminator/outlaw head work) BARE b16 head repair work has been done to one of the chambers due to a dropped valve...everything has been inspected after repair and is ok now $800
TWM 52 mm itbs square port matched to above head $1000
*SELLING FOR A FRIEND *95 LS block sleeved by rs machine.
85mm sleeves
wiseco 13.5:1 compression pistons
eagle h beam rods with arp rod bolts
full rotating assembly balanced and blue printed
itr oil pump
The block needs to be bore and honed to 85.5mm. Friend blew a head gasket and the the coolant rusted inside the sleeve and ate away at it. this was his old race block made 255hp 165tq. only asking $500
spare GSR head that i was going to get done but do not need it anymore...cleaned and ready to be put back together(all you need to do is get it resurfaced) or sent out to get ported and all the good stuff $250
92-95 ex/si cluster $60
BOTH brand new only opened the package to check them out OEM driver and passenger side CRX mirror block off plates! throw me an offer good for either deleting your mirrors or using them as base plates to make custom side view mirrors...$80 obo
I'll get pictures up of the other stuff tomorrow
buyer pays shipping and paypal fees...
Omnipower drag full coilover suspension 18k/12k $700 plus shipping and pp fee
Anyone interested in a ssr/dtr side exit race header, Stainless light weight(Danny used his light weight flange),exits out the driver side,megaphone with reverse cone. Looking to trade for one that exits under the car i.e. RMF ,SMSP made for high comp 2.0 liter setups etc or sell for $900 obo... payed 1200 when I had it made. Made 268whp 175 tq on my 2.0l b series race motor
pictures of the header now
single scrape from getting on and off the trailer
the black spot by the o2 bung is plastic from my wideband and the discoloration by the tip is from my bumper rubbing on it
Alaniz square port race(eliminator/outlaw head work) BARE b16 head repair work has been done to one of the chambers due to a dropped valve...everything has been inspected after repair and is ok now $800
TWM 52 mm itbs square port matched to above head $1000
*SELLING FOR A FRIEND *95 LS block sleeved by rs machine.
85mm sleeves
wiseco 13.5:1 compression pistons
eagle h beam rods with arp rod bolts
full rotating assembly balanced and blue printed
itr oil pump
The block needs to be bore and honed to 85.5mm. Friend blew a head gasket and the the coolant rusted inside the sleeve and ate away at it. this was his old race block made 255hp 165tq. only asking $500
spare GSR head that i was going to get done but do not need it anymore...cleaned and ready to be put back together(all you need to do is get it resurfaced) or sent out to get ported and all the good stuff $250
92-95 ex/si cluster $60
BOTH brand new only opened the package to check them out OEM driver and passenger side CRX mirror block off plates! throw me an offer good for either deleting your mirrors or using them as base plates to make custom side view mirrors...$80 obo
I'll get pictures up of the other stuff tomorrow
buyer pays shipping and paypal fees...
Last edited by allmotaeg6; Feb 8, 2010 at 10:59 AM.
