99" complete GSR head- Fresh*!, R.M v.t/ Suppertech valves *$750 shipped!!! cheap!!!!
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 9,843
Likes: 320
From: san diego, ca
99" complete GSR head- Fresh*!, R.M v.t/ Suppertech valves *$700 shipped!!! cheap!!!!
* price drop now $580 shipped without intake manifold and stock itr valves installed!! Up for sale is my fresh 99'' GSR head complete minus cams and dizzy! head is legit and has been seviced by my good friend Noel Villabos at:
7865 Raytheon rd.
San Diego, CA 92111
shop 858 565-7467
cell 619 459 9515
He used to work for napas machine shop in clairemont s.d ca who directly serviced all of honda dealerships heads in clairemont/kerny villa road i believe, any how he now owns his own head shop and has done several heads for me 3 which were on my built motors he does great work and the pics speak for themselves. please bump if viewed and my vouches are welcom to chime in, im a great seller here who has tons of vouches from all sorts of parts sold here on h.t.
heres the specs:
This head has brand new Rocket Motor dual valve springs and titanium retainers!!** RM valvetrain was $250!!
full oem gasket set installed!: new valve seals!, cam seals(on side) ect.
all new gaskets installed in stock intake manifold, injectors.
resurfaced lightly for a clean straight flat surface not milled!
hot tanked
3 angle valve job
new LMA's and low mileage rocker arms installed.
Suppertech high comp. flat valves!!** bumps your comp. by .03( stock itr valves available.)
stock intake manifold comes with all new gaskets installed in injectors, throtle body ect.
Hondata intake manifold gasket!
Hondata throtle body gasket!
fresh gloss black painted valve cover!!!***
this head is fresh and ready to make power! asking $800 shipped firm!! iv updated my thread so this is my last gsr head left!
heres a vouch list of some happy customers!
[AMG-fresh built swap b16a block/gsr head/tranny 0 miles lots a pics! new price $2,700!!!!
http://www.hondamarketplace.com/show...2483912&page=3
Heres a good one lol.. damn SSR street sweaper b series race header brand new!!!
**SOLD $800 to airbagclub**
all-mtr-teg- b16 head
(holding for b0osted iinteg) skunk 2 pro series gsr intake manifold portmatched for a 68mm throtle body.
..(holding for CW-ITR)..AEM itr 3'' cai painted gloss blackw/ aem logo in polish with carb # for gsr motor!! -$65 shipped, Tri-y rep. big tube version b series header, two pieces have been tig welded so no leakes has two dents on bottom from being lowered made 216hp on my 1.8l gsr with the dent so it still makes real good power, got it for $500 on ebay payed $100 for the tig weld -$90 shipped!, RC 310cc injectors no clips 10k -$70 shipped "Bump for dirt cheap prices. Can wait to pay and receive my parts."
Quote:
Originally Posted by JJtegfan14
i'm lookin for a b20 crank pulley for my jrsc setup if it'll fit and you'll ship i'll buy
crip-vtec solinoid
hmoobhero
omiehomie- $800 evo 9 recaro seats
http://www.hondamarketplace.com/show....php?t=2531569
2000si b16 head
bzyq2001 brand new itr valves
bebe101 i think lsd gsr tranny
fin781
ages222000- Comptech ice box intake!!!!! gsr/ type r!!!
7865 Raytheon rd.
San Diego, CA 92111
shop 858 565-7467
cell 619 459 9515
He used to work for napas machine shop in clairemont s.d ca who directly serviced all of honda dealerships heads in clairemont/kerny villa road i believe, any how he now owns his own head shop and has done several heads for me 3 which were on my built motors he does great work and the pics speak for themselves. please bump if viewed and my vouches are welcom to chime in, im a great seller here who has tons of vouches from all sorts of parts sold here on h.t.
heres the specs:
This head has brand new Rocket Motor dual valve springs and titanium retainers!!** RM valvetrain was $250!!
full oem gasket set installed!: new valve seals!, cam seals(on side) ect.
all new gaskets installed in stock intake manifold, injectors.
resurfaced lightly for a clean straight flat surface not milled!
hot tanked
3 angle valve job
new LMA's and low mileage rocker arms installed.
Suppertech high comp. flat valves!!** bumps your comp. by .03( stock itr valves available.)
stock intake manifold comes with all new gaskets installed in injectors, throtle body ect.
Hondata intake manifold gasket!
Hondata throtle body gasket!
fresh gloss black painted valve cover!!!***
this head is fresh and ready to make power! asking $800 shipped firm!! iv updated my thread so this is my last gsr head left!
heres a vouch list of some happy customers!
[AMG-fresh built swap b16a block/gsr head/tranny 0 miles lots a pics! new price $2,700!!!!
http://www.hondamarketplace.com/show...2483912&page=3
Heres a good one lol.. damn SSR street sweaper b series race header brand new!!!
**SOLD $800 to airbagclub**
all-mtr-teg- b16 head
(holding for b0osted iinteg) skunk 2 pro series gsr intake manifold portmatched for a 68mm throtle body.
..(holding for CW-ITR)..AEM itr 3'' cai painted gloss blackw/ aem logo in polish with carb # for gsr motor!! -$65 shipped, Tri-y rep. big tube version b series header, two pieces have been tig welded so no leakes has two dents on bottom from being lowered made 216hp on my 1.8l gsr with the dent so it still makes real good power, got it for $500 on ebay payed $100 for the tig weld -$90 shipped!, RC 310cc injectors no clips 10k -$70 shipped "Bump for dirt cheap prices. Can wait to pay and receive my parts."
Quote:
Originally Posted by JJtegfan14
i'm lookin for a b20 crank pulley for my jrsc setup if it'll fit and you'll ship i'll buy
crip-vtec solinoid
hmoobhero
omiehomie- $800 evo 9 recaro seats
http://www.hondamarketplace.com/show....php?t=2531569
2000si b16 head
bzyq2001 brand new itr valves
bebe101 i think lsd gsr tranny
fin781
ages222000- Comptech ice box intake!!!!! gsr/ type r!!!
Last edited by wunfstgsr; Dec 7, 2009 at 06:02 PM. Reason: price drop!
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 9,843
Likes: 320
From: san diego, ca
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 9,843
Likes: 320
From: san diego, ca
Re: 99" complete GSR head- Fresh*!, full v.t/ Suppertech valves,hondata lots more che
more vouches!
94_teg
Airbag Club
dc forever guy
digitalcongo
EGWhore
jaynmeli
Quinn1387
94_teg
Airbag Club
dc forever guy
digitalcongo
EGWhore
jaynmeli
Quinn1387
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 9,843
Likes: 320
From: san diego, ca
Re: 99" complete GSR head- Fresh*!, full v.t/ Suppertech valves,hondata lots more che
that must be a diffrent head i had for sale i have tons of pics of gsr heads that i sell sometimes i get mixed up i assure you its a 99'' gsr head stamp says 98 which means its a 99'' cause they come into production a year later after the motor is casted.
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 9,843
Likes: 320
From: san diego, ca
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 9,843
Likes: 320
From: san diego, ca
Thread Starter
Honda-Tech Member
Joined: Nov 2007
Posts: 9,843
Likes: 320
From: san diego, ca
Re: 99" complete GSR head- Fresh*!, full v.t/ Suppertech valves,hondata lots more che
my advise is do the LS-vtec! build your ls block its like a stroker motor! if done right you can have a motor that will make great tq and hp! just build it simple and it should be a great motor with this head!