AL S366 hatch, Bogarts, Bension 2.0, etc $8000 obo
11-12-2009, 03:35 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Mobile, AL, USA
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
S366 hatch, Bogarts, Bension 2.0, etc $8000 obo
Friend is selling his hatch back. He just finished it and is already tired of it and wants to build a rwd turbo LS1 240sx. The hatch is super clean and was painted by me. It's tuned on pumpgas by tampamike.org (mbsponge). It made 408 @14 psi on the dyno. it's tuned for 17-18 but would only spin on the dyno. It's been taken to the track once and ran a 7.08 in the 1/8th missing 3rd gear.
Mod List:
Engine :benson sleeved 84mm LS block, eagle rods, JE 9.0:1 pistons. ported and polished b16 head, itr cams, str cam gears, supertech valvesprings and retainers, port matched to head victor x manifold , 70mm blox thottle body, 3" IC piping, Tial BOV, 4" intercooler. 1600cc injectors, AEM fuel rail and AFPR, Jegs inline fuel filter, T1R catch can w/ -10 lines. New oil pump, bearings, gaskets an etc. CC stage 5 clutch and CC flywheel. B16 trans w/ quaife
Turbo kit: AFI top mount manifold, tial 44 wastegate, bullseye S366 turbo, Tampamike.org downpipe.
Wheels/Suspension: Coilovers, slotted rotors, extended wheel studs, Bogart front and rear drag wheels. 24.5 M&H slicks. Stock LS mesh wheels.
Interior: 8 point cage, S14 seats, aftermarket steering wheel, completly shaved engine bay, and wire tuck.
exterior: freshly painted milano red with black top and hood. cf duckbill ( bitch *** dog chewed front bumper ) lol
Electronics: PLX wideband, MSD digital 6 box, MSD coil, MSD plug wires. Hondata S100, Greddy boost controller.
Notes: car needs anothef fuel pump to be tuned on race gas. Has no problem making 700whp and running 9's. The car is extremely clean. The only known problems is it has a oil leak. we tracked it down to the valve cover from where the bungs were welded in. we are going to try and deck it and hope it fixes it.
paint/engine/turbo has 500-600 miles max
PRICE: $8,000... NO TRADES for other hondas or acuras.. NO HATING ON THE PRICE.
pics will come later. Here's a link to an old thread with pics..
http://hondamarketplace.com/showthread.php?t=2472787
251-533-2575
Mod List:
Engine :benson sleeved 84mm LS block, eagle rods, JE 9.0:1 pistons. ported and polished b16 head, itr cams, str cam gears, supertech valvesprings and retainers, port matched to head victor x manifold , 70mm blox thottle body, 3" IC piping, Tial BOV, 4" intercooler. 1600cc injectors, AEM fuel rail and AFPR, Jegs inline fuel filter, T1R catch can w/ -10 lines. New oil pump, bearings, gaskets an etc. CC stage 5 clutch and CC flywheel. B16 trans w/ quaife
Turbo kit: AFI top mount manifold, tial 44 wastegate, bullseye S366 turbo, Tampamike.org downpipe.
Wheels/Suspension: Coilovers, slotted rotors, extended wheel studs, Bogart front and rear drag wheels. 24.5 M&H slicks. Stock LS mesh wheels.
Interior: 8 point cage, S14 seats, aftermarket steering wheel, completly shaved engine bay, and wire tuck.
exterior: freshly painted milano red with black top and hood. cf duckbill ( bitch *** dog chewed front bumper ) lol
Electronics: PLX wideband, MSD digital 6 box, MSD coil, MSD plug wires. Hondata S100, Greddy boost controller.
Notes: car needs anothef fuel pump to be tuned on race gas. Has no problem making 700whp and running 9's. The car is extremely clean. The only known problems is it has a oil leak. we tracked it down to the valve cover from where the bungs were welded in. we are going to try and deck it and hope it fixes it.
paint/engine/turbo has 500-600 miles max
PRICE: $8,000... NO TRADES for other hondas or acuras.. NO HATING ON THE PRICE.
pics will come later. Here's a link to an old thread with pics..
http://hondamarketplace.com/showthread.php?t=2472787
251-533-2575
Thread
Thread Starter
Forum
Replies
Last Post
