I'm needing some help identifying these vacuum hoses! (pic)
Thread Starter
Honda-Tech Member
Joined: Aug 2006
Posts: 123
Likes: 0
From: Dayton, TN, United States
Hey guys,
well my car has been acting up since I installed my new radiator, theres a vacuum leak somewhere. I looked everywhere in the engine and found 2 hoses that were just hanging. They are relatively near each other, but dont reach completely. One is coming off the transmission near the top, its about a 4 inch tube with an open end, and the other is coming off of my fan, out the back, a 2 or 3in tube sticking straight downward, the end of this tube is cut diagonally like penne pasta.
If you know whats up on this, let me know please!!
Here are the pics:

well my car has been acting up since I installed my new radiator, theres a vacuum leak somewhere. I looked everywhere in the engine and found 2 hoses that were just hanging. They are relatively near each other, but dont reach completely. One is coming off the transmission near the top, its about a 4 inch tube with an open end, and the other is coming off of my fan, out the back, a 2 or 3in tube sticking straight downward, the end of this tube is cut diagonally like penne pasta.
If you know whats up on this, let me know please!!
Here are the pics:
both of these lines are not vacuum lines, the tranny line is just a vent.
the fan line I don't know what it does but it's not important for the engine to function.
the fan line I don't know what it does but it's not important for the engine to function.
Thread Starter
Honda-Tech Member
Joined: Aug 2006
Posts: 123
Likes: 0
From: Dayton, TN, United States
Ok good to know, thanks again Dan! I still have yet to test the brake booster thing, Im actually outside working on the car right now. How might I figure something out quickly without having to take the booster off or anything?
disconnect the booster vacuum line and plug it.
Thread
Thread Starter
Forum
Replies
Last Post
Jaydeep
Honda Civic (2001 - 2005)
6
Dec 2, 2009 11:27 PM
Tuner Eddy
Forced Induction
10
Sep 28, 2008 06:19 AM





