1998 Honda Civic EX Sedan 5-Speed
Viper 5002 alarm system

H2/1 LIGHT BLUE (-) Second Unlock
H2/2 GREY (-) Hood Pin Input, Zone 6
H2/3 ORANGE/BLACK Retained Accessory Output
H2/4 GREY/BLACK (-) Channel 6 Output
H2/5 WHITE/BLACK (-) Channel 5 Output
H2/6 VIOLET/BLACK (-) Channel 4 Output
H2/7 LIGHT BROWN (-) Horn Honk Output
H2/8 LIGHT GREEN/BLACK (-) Factory Disarm Output

Someone please help me figure this out below?

This is what I have so far:
H2/1 ??
H2/2 to hood pin (18 gauge)
H2/3 ??
H2/4 ??
H2/5 ??
H2/6 ??
H2/7 to Horn BLUE/GRAY (does this causes the horn to go off if alarm is triggered?)
H2/8 ??

I did want to be able to press once to unlock drivers door, second press to unlock all other doors.


Thanks for any help or advice!!
-Joseph

 

You don't use any of those. If you want driver's priority unlock, you'll use the light blue wire and an extra relay.

 

So:
87a to GROUND
85 to H2/1 LIGHT BLUE (-) Second Unlock
30 to to neg. output door unlock = green/orange (-) ???
86 and 87 JOINED and to the 520T GRAY (+) 12V Output OR to 12V Constant under dash? Fuse needed here?

Also...
H2/7 to Horn BLUE/GRAY (does this causes the horn to go off if alarm is triggered?)

Thanks.