I don't know any shops on a "friend" relationship, nor do I know anyone with a shop, dyno, or tuning set up..
So basically looking for someone in the chicago area, (I'm 40 miles west of chicago) that can do a real basic tune on my car.
Nothing fancy... my ecu is just tuned for a d15 turbo when I now have a gsr.
If anyone thinks they could do this shoot me a msg on here, or call or text me at 630-881-4712
Thanks guys

 

The two shops I am most familiar with are Pro Function and Suja 1 Motoring. I am looking to get my hatchback tuned as well and last time I called ProFunction, they quoted me $175. Suja 1 is definitely closer and I'm not sure of their pricing but they are great guys up there.

Pro Function Automotive
7725 Grant St. Unit 3
Burr Ridge, IL 60527
(847) 895-9520
Fax# (630) 396-9022

Suja1 Motoring
508 E. St. Charles rd.
Carol Stream, IL 606188
630-407-0711
sales@suja1motoring.com

Your hatchback is really nice, I've seen nothing but riced out cars when I pass through Elburn.

 

Thanks bro!
I'm going to distance these two shops out from my house, I don't know where burr ridge is but carol stream I for sure do. 175 is not bad.. I'll probably give both a call tomorrow for a quote, along with one six in elk grove..
actually I'll call mark at one six first, and see why my car is still pissin oil after their valve job. RAWR
And yeah no kidding. I see nothing but rice in st. charles, elburn, and especially when I go to waubonsee...
there's a kid who left my class with me, and I was pulling out of my spot and he scared the **** out of me when all of a sudden he made his car blow up with blue neons from front to back lol

 

http://www.iturboworks.com/

 

**** one six. they suck at building motors and doing any type of tunes. go to suja 1. my brother and my best friend just got their boosted k setups and both pulled great numbers. jason at suja 1 is a pretty cool dude.

 

whatsup joe! don't go to one six... go to pro function or suja1. or just buy a chipped ecu with a gsr map on it.

 

Talk to Mikey at Profunction.

 

RCN In Bloomingdale FTW. Chris is the ****!

 

listen to these guys, stay away from one6.!!!!
my buddy brought his del sol there for tuning,
3 days later the cops call him... found his del sol sitting on the side of the road with everything torn out of it, EVERYTHING. just the rolling shell was left.
stay away from those scumbags

 

WTF!! I haven't heard of this one!

 

wow no ****... alright then, thanks everyone! probably explains why the hell after a valve job from one six, my head is now leaking oil out of the front right corner!! good ****.
Still burning oil tooooooo not assss bad though.
I'll give suja1 a call then, they are only about 20 miles from my house :D

 

That sucks to hear man. There is a thread in the other Regional Midwest thread about One6 and their isn't a whole lot of positive things being said. I've only ever been there once and that was years ago.

I've talked to Brandon and the guys at Suja1 quite a lot and they are some of the most down to earth guys I've ever met. I'm don't know any of the guys from ProFunction but hear nothing but good things. I don't think you can really go wrong with either shop, just stay away from One6.

If you lucky, you'll spot a few nice cars around Geneva and St. Charles. Here in Batavia it's mostly just douchebags with riced out Del Sols. Are you planning to go to the Starved Rock meet in a few weeks? I'm organizing a pre-meet in Aurora, you should make plans to come.

 

when is that meet?

 

info pl0x.

 

ya my buddy was a long time customer of one six. took his hatch there with built b20 vtec and mark took forever to get it done. finally like 2 months later he got the engine back from the machine shop and got the car running, and the engine was put together wrong so he had a bunch of problems. mark said it wasnt their fault because things like that happen when you race it lol he had the car less than a week and maybe drove it like twice.

 

damnn, my buddys got a 93 lude and it was sitting at one6 for 7 months...
he was just waiting for them to be done with h22 swap, and new clutch.
7 months.

 

seven months lol that is insanity, The few things I have had done there were done same day and for the most part done right.

 

Saturday November 7th.

Here is the link for the Pre-Meet I'm organizing. The Pre-Meet is mostly for all of us west of Chicago basically. But ANYONE is more than welcome to roll with us.

https://honda-tech.com/forums/midwest-114/aurora-batavia-geneva-pre-starved-rock-meet-nov-7th-%40-11-00am-2663267/

The following link is for the actual meet that my buddy Marc organizes.

https://honda-tech.com/forums/midwest-114/3rd-annual-starved-rock-end-year-meet-nov-7th-il-wi-mi-ia-mo-ky-2648001/

 

Nice. November 7th aye? I should be around. I'll take off work so I know I won't have to work that day.
Yeah rtboy10, I bought a distributor there, that didnt fix my problem I had, turned out it was wiring.. So I took it back had to pay a restock fee, and went ahead did a leak down and compression as well as fixing my wiring issue, he mark said we'd be even. I guess that was alright, about 180 for all that? Mark said more than likely my problem was my seals, went ahead did that now my head is leaky and still burning. wtf should of went to Pro function in the first place.
I was just there today, and seems like they got their **** together and they're nice guys too!

 

Should I just take my head off have it completely redone. resurfaced, not just new seals.. new guides, keepers, everything... this winter?

 

Profunction!