so i just got a clock for my eg and i was trying to get the bezel off but that damn thing doesnt want to pop off..i unscrewed the 3 screws that i know of..the 2 where the cluster is and the one behind the hazard lights switch is..is there more that im missing?

also my clock that i got came with 4 wires.. a yellow, white w/ blue line, black, and red w/ black line... anyone know where to wire this? thanks.. : )

 

The dash is already pre-wired. The plug is already there too. You have the screws out so just pull carefully.

 

pull left to right. it always work for me like that.

 

so theres only 3 screws? oh so there should be a plug that plugs into the clock? i have the cx eg hatch tho...not the si..

 

There are a couple of tabs on the bottom of the bezel. You need to jam a couple pieces of thin plastic underneath the bottom bezel. I just cut up a dvd case to do this.

 

yea it 'unclips' under the gauges

 

ohhh ok...but wat about that plug? do i have it if i have a CX model?

 

should, yours had the factory block off right?

 

^^ yes it does..thats another hard piece to take out..lol

 

well, pull off the bezel first. or use a pocket knife to pop the block off out...

 

i will try to take it out..